Ok, so I'm done with the exhaust on my car finally and I've got some leftover parts.
2 reproduction OE Challenger mufflers and over the axle pipes, 2 1/4" inlet, 2" outlet. I can separate the pipes if you don't need/want them, would help shipping costs a bunch. These were on my car when I got it. They were clamped pretty hard at the inlets, you'd probably have to use a pipe expander if you wanted to use the slip fit again, or just cut and weld them on. Other than that, they're in great condition. $50 + shipping for the pair.
2 Flowmaster 40's. 2.5" ID offset inlet/ center outlet (only 1 pictured, other one looks identical). These were on my g/f's '71 Ford F100, unsure on mileage, but its a lifted 4x4 so no ground damage
. Cases have a little surface rust, you can actually see where the baffles are to confirm they're old 40's. These were welded on so they have been cut, about 1/4" back from the beginning of the slip fit. This got rid of all the old exhaust pipe, these will still slip on to a 2.5" pipe and clamp without issue. $50 + shipping.
Parts are located in the Sacramento CA area, can ship anywhere at buyer's expense. Feel free to make me an offer!
PM or email at phoenix1379ATyahoo.com . Just replace AT with @
Topic: Mufflers for sale- repro challenger mufflers and 2.5" flowmasters (Read 514 times)
