Author Topic: Tranny swap....  (Read 578 times)

Offline cda340

  • Newbie
  • *
  • Posts: 1
Tranny swap....
« on: June 10, 2009 - 12:25:16 PM »
I'm looking at a "temporary" summer-solution for my 727 while I decide to either sell my Cuda  :crying:, rebuild the original 727, or convert it to a 4 speed manual.   :bigsmile:

I have access to an 85 Dodge Camper Van 727 with less than 1,000 miles on a rebuild, but need to find out if it'll work for my application.

My ride is a 1972 'Cuda (BS23) 340 car. 

Any help is GREATLY appreciated!!

Jim




Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Tranny swap....
« Reply #1 on: June 11, 2009 - 01:36:17 AM »
Terry can give you a for sure on this but assuming both are small block the Van tranny will bolt up & work

Challenger - You`ll wish You Hadn`t

Offline tactransman

  • Sr. Resident
  • ******
  • Posts: 5401
  • 1973 Challenger- Member here since April 14, 2006
Re: Tranny swap....
« Reply #2 on: June 11, 2009 - 09:18:58 AM »
Yes,it should work. As long as it a small block like CP said and it is not a "shorty" version. If you have a slap stick floor shifter,make sure that it has the two tab locations on the bottom of the extension housing for the bracket to bolt up.
Terry-tactransman 
Torqueflite/Automatic Transmission Specialist
Union, Mo.
Give a man a fish and he eats for a day,teach him to fish and he eats for a lifetime.