News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Front Break Hoses  (Read 771 times)

    Offline 4yuckfous

    • Jr. Member
    • **
    • Posts: 127
    Front Break Hoses
    « on: July 08, 2009 - 02:15:41 AM »
    someone can tell me how long the front brake hoses for a 1970 Barracuda are ?
    14, 16 or 18 inch long
    :feedback:
    Andrea
    Logged
    The streets don't get wider, if you drive slower !


    Offline Bullitt-

    • Permanent Resident
    • *******
    • Posts: 12167
    • Better Things To Come Member Since 2/16/06
    Re: Front Break Hoses
    « Reply #1 on: July 08, 2009 - 06:26:10 AM »
    According to NAPA 14.438"   for disk brake hose

    tem#:  UP 35017

    Price: $19.49
    tax and shipping not included

    Disclaimer: The stated price may vary from the in store price and may change at anytime.


    Attributes:
    Features & Benefits:Copper Washers (Where Necessary) & Properly Threaded End Fittings Provide Leak Free Connections.
    Features & Benefits:Dryrot Resistant Rubber Compounds & Corrosion Resistant End Fittings Ensure Reliability.
    Features & Benefits:Meets Federal Safety Standards.
    Product Features:Engineered To Meet Or Exceed O.E. Design & Quality.
    Length:14.438"
    Type of Ends:7/16" - 20 & 7/16" - 24.
    Gasket Part #:24951
    Logged
    Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
    Screwed by Photobucket!

    Offline 4yuckfous

    • Jr. Member
    • **
    • Posts: 127
    Re: Front Break Hoses
    « Reply #2 on: July 08, 2009 - 06:41:08 AM »
    Thanks
    But I want to change the brake system.
     :working:
    I have to order the Flex Lines from Wilwood
    and they have 3 different sizes. :clueless:
    The OEM-Hoses don't fit on Wilwood Calipers. :pullinghair:
    Logged
    The streets don't get wider, if you drive slower !

    Offline HP2

    • Resident
    • *****
    • Posts: 4478
    Re: Front Break Hoses
    « Reply #3 on: July 08, 2009 - 08:34:21 AM »
    Well, if they are mounted in the same spot as the stock ones, a 14 would be close and a 16 would give you some extra room for movement. If you reversed the calipers/spindles, you might have to move the hard lines and remeasure.
    Logged

    Offline Aracer

    • Jr. Member
    • **
    • Posts: 452
    Re: Front Break Hoses
    « Reply #4 on: July 11, 2009 - 05:58:24 PM »
    I went to a Speed shop for the braided lines and fittings, and then you can exchange them the same day if you get it wrong. The price difference is minor.
    Logged
    Pages: [1]
    « previous next »