Running a fuel regulator - where do you put it?

[miketyler]

I have a new Edelbrock carb that is flooding occasionally. My mech fuel pump pulses between 7.5 and 9psi and needs to be regulated. I bought a regulator and am in the process of installing it. Would like to see some of your installations. The unit is larger than I expected. I'd like to keep it out of site but if not, on top of manifold.

Any ideas or pics of installs?

[moparniac]

 

[Chryco Psycho]

as near to the carb as possible usually

[moparniac]

The rear firewall isnt a bad option.....

[MrMopar440]

Mine is in about the same spot as Stroker's - but I have the bracket to drop it next to the carb (hangs off the two manifold bolts). Just have to make the time to move it.

[miketyler]

cool - will the regulator stabilize the pulsing?

[shadango]

It didnt stabilize mine all that much...I am running a different brand..a spectre.

[MrMopar440]

I know that mine stays rock-steady now

[jackie]

here's mine

[shadango]

My spectre DIED just a die after installing...so a holley is going to be ordered soon....

[miketyler]

Got all my parts in and put it together. No leaks! The unit comes torque striped from the factory at 2.0psi. 

I cranked it up to 5.0psi and all good. Pulsing is gone. It did get a little warmer than I'd like but it idles steady as a rock.