Author Topic: 70 _ 71 rear spoiler plates  (Read 4663 times)

Offline 72rtchallenger

  • Sr. Member
  • ****
  • Posts: 1734
  • 72 to 70 clone
    • cardomain
Re: 70 _ 71 rear spoiler plates
« Reply #15 on: July 11, 2009 - 06:25:38 PM »
i hope you get what you need,,hope i helped
72rtchallenger
my challengers restro at http://www.cardomain.com/ride/399010
what happens in the garage
stays in the garage




Offline 'Cuda Hunter

  • Sr. Resident
  • ******
  • Posts: 9102
  • Tastes Like Chicken
Re: 70 _ 71 rear spoiler plates
« Reply #16 on: July 11, 2009 - 06:27:00 PM »
Sorry, I knew something was wrong.
I havn't had a chally with a wing yet so that one passed on me.
"All riches begin as a state of mind and you have complete control of your mind"  -- B. Lee

wagesofsin

  • Guest
Re: 70 _ 71 rear spoiler plates
« Reply #17 on: July 11, 2009 - 06:32:02 PM »
Sorry, I knew something was wrong.
I havn't had a chally with a wing yet so that one passed on me.

all good, i may put a wing on my 'cuda as well!!

so you did good.   :2thumbs:

Offline 72rtchallenger

  • Sr. Member
  • ****
  • Posts: 1734
  • 72 to 70 clone
    • cardomain
Re: 70 _ 71 rear spoiler plates
« Reply #18 on: July 11, 2009 - 06:36:15 PM »
i dont know if the braces come with hardware but you will nee the special nut that attaches the leg studs to the plate,,they thread on to hold the wing in place and has outer threads to put another nut on to hold the plate to the leg stud
72rtchallenger
my challengers restro at http://www.cardomain.com/ride/399010
what happens in the garage
stays in the garage

wagesofsin

  • Guest
Re: 70 _ 71 rear spoiler plates
« Reply #19 on: July 11, 2009 - 06:50:49 PM »
ill look into that, i can make that if needed, but the plates for cheap is to good to pass on. having a full plate(s) means less time to actually get other things done.   :bigsmile:

Offline 72rtchallenger

  • Sr. Member
  • ****
  • Posts: 1734
  • 72 to 70 clone
    • cardomain
Re: 70 _ 71 rear spoiler plates
« Reply #20 on: July 11, 2009 - 07:03:19 PM »
you will need it,,it threads onto the stud and goes flush against the upper part of the brace and the nut goes flush on the bottom side of the brace,,this secures the spoiler and keeps the stress off the trunk lid,,it has a nut fitting on one end and then has a threaded sleeve that passes thru the brace so you can put a nut on it,,this puts all stress on the brace,not the trunk lid
72rtchallenger
my challengers restro at http://www.cardomain.com/ride/399010
what happens in the garage
stays in the garage

wagesofsin

  • Guest

Offline sprecks

  • Full Member
  • ***
  • Posts: 915
Re: 70 _ 71 rear spoiler plates
« Reply #22 on: July 11, 2009 - 07:41:17 PM »
Here they are installed on my car. Left then right side.
you can call me Jay
I've seen sicker dogs get well.

1971 Challenger Vert - 472 Hemi EFI
1969 Road Runner 440/Auto
2017 Ram Laramie 1500 - Hemi

Offline sprecks

  • Full Member
  • ***
  • Posts: 915
Re: 70 _ 71 rear spoiler plates
« Reply #23 on: July 11, 2009 - 07:46:38 PM »
I agree with 72rtchallenger. I recommend getting the correct hardware. I did mine with just the plates at first and then bought the correct studs and nuts. Made life alot easier. They are special. If they aren't adjusted right, the pedestals put a dip in the deck lid.
Jay
you can call me Jay
I've seen sicker dogs get well.

1971 Challenger Vert - 472 Hemi EFI
1969 Road Runner 440/Auto
2017 Ram Laramie 1500 - Hemi

Offline 'Cuda Hunter

  • Sr. Resident
  • ******
  • Posts: 9102
  • Tastes Like Chicken
Re: 70 _ 71 rear spoiler plates
« Reply #24 on: July 11, 2009 - 08:11:02 PM »


Sprecks

Are these mounts for both 70 and 71 ? 
Or are they for one specific wing and year?   
"All riches begin as a state of mind and you have complete control of your mind"  -- B. Lee

wagesofsin

  • Guest
Re: 70 _ 71 rear spoiler plates
« Reply #25 on: July 11, 2009 - 08:21:45 PM »
thanks for the pics, yea, i can actually make the hardware. so im cool there.

Offline sprecks

  • Full Member
  • ***
  • Posts: 915
Re: 70 _ 71 rear spoiler plates
« Reply #26 on: July 11, 2009 - 09:53:24 PM »

Sprecks

Are these mounts for both 70 and 71 ? 
Or are they for one specific wing and year?
They are listed in the catalog as fitting both. Weather they are "correct" for both years, sorry, I'm not sure.
you can call me Jay
I've seen sicker dogs get well.

1971 Challenger Vert - 472 Hemi EFI
1969 Road Runner 440/Auto
2017 Ram Laramie 1500 - Hemi