Author Topic: bulkhead to rear wiring plug  (Read 891 times)

Offline 30below

  • Jr. Member
  • **
  • Posts: 273
bulkhead to rear wiring plug
« on: August 24, 2009 - 10:28:32 AM »
Looks like where they plug together by the kickpanel,there is 2 yellows and a pink pulled out of the bulkhead side.According to the wiring scematic they are for the dome light.First question is should the 2 yellows connect to the same spot,and are these metal connectors mopar specfic or available at any outlet.




Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: bulkhead to rear wiring plug
« Reply #1 on: August 24, 2009 - 10:54:27 AM »
yes the 2 wires will plug to each other inside the kick panel & they are for the dome light 

Challenger - You`ll wish You Hadn`t

Offline 30below

  • Jr. Member
  • **
  • Posts: 273
Re: bulkhead to rear wiring plug
« Reply #2 on: August 24, 2009 - 12:34:41 PM »
Thanks Cryco.Just to clarifi,there should be 2 yellows coming from the dash side to plug to 1 yellow on the rear wiring side?

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: bulkhead to rear wiring plug
« Reply #3 on: August 25, 2009 - 11:42:02 AM »
sounds correct , the dash side has 1 wire toi each door switch to ground the circuit

Challenger - You`ll wish You Hadn`t

Offline 30below

  • Jr. Member
  • **
  • Posts: 273
Re: bulkhead to rear wiring plug
« Reply #4 on: August 26, 2009 - 12:00:32 PM »
Gotcha,thats again