Author Topic: Federal Pump rebuild kits  (Read 1934 times)

Offline mickey

  • Jr. Member
  • **
  • Posts: 174
Federal Pump rebuild kits
« on: October 01, 2009 - 06:20:51 PM »
Is there a rebuild kit for a federal power steering pump , or anyone try to rebuild a leaky pump or some kind of fix,  fluid pouring out around the pulley shaft.  Thxs




Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Federal Pump rebuild kits
« Reply #1 on: October 02, 2009 - 02:44:02 AM »
Omega makes a kit for it , you should be able to order it through a local parts store

Challenger - You`ll wish You Hadn`t

Offline Topcat

  • C-C.com Expert
  • ********
  • Posts: 15376
  • Member since 9/16/04
Re: Federal Pump rebuild kits
« Reply #2 on: October 02, 2009 - 06:03:02 AM »
I re built my Federal pump I bought on E bay. I called them to confirm it was the right one by p/n. Wasn't too difficult to do. Need snap ring pliers once the pulley is off. The pump is held in by a large O ring seal. Persuade gently on edges to release it from the housing.

Here is where I bought mine from:

http://cgi.ebay.com/ebaymotors/Mopar-Federal-Power-Steering-Pump-Seal-Kit-Rebuild-kit_W0QQitemZ390100303765QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item5ad3ca3f95&_trksid=p4506.c0.m245

This isn't the kit I ordered BTW. So call them before you order.
« Last Edit: October 02, 2009 - 06:06:39 AM by Topcat »
Mike, Fremont, CA.


Offline mickey

  • Jr. Member
  • **
  • Posts: 174
Re: Federal Pump rebuild kits
« Reply #3 on: October 04, 2009 - 07:29:14 PM »
Perfect, Thxs, CP, Topcat got one on the way..