News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Clearance Between Cam Sprocket & Cam Plate?  (Read 568 times)

    Offline cwestra

    • Sr. Member
    • ****
    • Posts: 1120
    Clearance Between Cam Sprocket & Cam Plate?
    « on: September 04, 2009 - 05:11:34 PM »
    Anyone know how much clearance there should be between the rear cam sprocket surface and the front of the cam plate on a small block?  I just mounted mine and after tightening the cam bolt with eccentric and washer on, I bet I have less than .004".  Seems like a tight fit but rotates fine.  I don't know what it should be.
    Logged
    Corey - in Northern Indiana


    Offline 72cudamaan

    • Resident
    • *****
    • Posts: 3248
    Re: Clearance Between Cam Sprocket & Cam Plate?
    « Reply #1 on: September 04, 2009 - 06:33:39 PM »
    As long as there is clearance you'll be just fine. You really dont want much clearance anyway. Otherwise the cam could "walk" front to back.
    Logged
    If I cant fix it, it's broke
     
    Andy  (phukker whither)

    Offline cwestra

    • Sr. Member
    • ****
    • Posts: 1120
    Re: Clearance Between Cam Sprocket & Cam Plate?
    « Reply #2 on: September 05, 2009 - 06:16:26 AM »
    Quote from: 72cudamaan on September 04, 2009 - 06:33:39 PM
    As long as there is clearance you'll be just fine. You really dont want much clearance anyway. Otherwise the cam could "walk" front to back.
    Sounds good.  Thanks.
    Logged
    Corey - in Northern Indiana
    Pages: [1]
    « previous next »