Author Topic: Parts needed for my Challenger  (Read 3022 times)

Offline challenger_73

  • Jr. Member
  • **
  • Posts: 444
Parts needed for my Challenger
« on: September 30, 2009 - 11:03:39 AM »
Hello all, This is just a list of items that I am looking for. I'm going Mopar show next month & I thought that i would look here first in case there is anyone that had started a project and may have parts left over or sold their car and had parts left over. I did meet one person that sold the shell and had new parts left over. Here is the list. please let me know if you have any of these items for sale. thanks.

1.   Body Plug Kit (new)
2.   Headlight rings (72-74 Challenger New)
3.   Fender Bolt Kit bilateral (New)
4.   Quarter Panel Emblems
5.   Grill Emblem 72-74 Challenger (New)
6.   Grill bolt kit 72-74 Challenger
7.   Door handles (New)
8.   Carpet New Black 80/20 loop
9.   Headliner (New) Black
10.   Floor mats (New) Black
11.   Bumper guard mounting kit (Rear)
12.   Bumper filler front 70-72 Challenger type
13.   Gaskets for hood scoops
14.   Front and rear valence mounting kit
15.   Shifter Plate Chrome Automatic.
16.   Console shifter lens
17.   Package tray (New) black
18.   Wiring harnesses under hood (New)
19.   Sill plates (New or in excellent condition)
20.   Trunk Floor Extensions (New)
21.   Trunk Pan (New)
22.   Rallye A/C & Heater control bezel
23.   Antenna bezel & nut (New)
24.   Driver side mirror interior Bezel for Remote mirror. (New)
25.   Chrome Mirrors (New)
26.   Fuel Tank filler gasket
27.   Fuel Tank filler Rubber for trunk
28.   Fuel tank (New)
29.   Wheel well Chrome(New)
30.   Trunk mat (New)
31.   Trunk weather stripping
32.   Weather stripping all
33.   Cat wiskers
34.   Dome lamp cover




Offline the_engineers

  • Resident
  • *****
  • Posts: 2639
  • Cheap, fast, reliable...pick 2
Re: Parts needed for my Challenger
« Reply #1 on: September 30, 2009 - 04:56:01 PM »
I have the top of door weatherstrip (cat whiskers) for a 'Cuda...not sure if they fit a Challenger.
Brooks

1971 'Cuda 360
2004 Infiniti G35 6-spd Coupe
2001 Toyota Solara Convertible
2002 GMC Savana 1500 Explorer Hightop Conversion
1972 Dodge Dart Swinger...keeping the Slant.  Rocking the turbos.

Offline moparclown

  • Resident
  • *****
  • Posts: 4335
Re: Parts needed for my Challenger
« Reply #2 on: September 30, 2009 - 05:27:43 PM »
I have a new carpet for a challenger that was bought in 1978 and never used.

Offline Mentally Challenged

  • Sr. Member
  • ****
  • Posts: 1044
Re: Parts needed for my Challenger
« Reply #3 on: October 01, 2009 - 09:17:51 PM »
Where are you located?
Chris, Ohio

sleepychallenger

  • Guest
Re: Parts needed for my Challenger
« Reply #4 on: October 01, 2009 - 09:30:31 PM »
i have headlight rings, but not new. probably driver quality

Offline MJS73

  • Sr. Member
  • ****
  • Posts: 1522
    • Mike's 1973 Challenger
Re: Parts needed for my Challenger
« Reply #5 on: October 02, 2009 - 06:50:20 PM »
I have the headlight rings I took off my car...they're excellent. Also have the console shifter plate.

Mike
www.mikes73.com
Don't PM me - send me an e-mail at mjsavage2001@yahoo.com


Offline CHUCKS71

  • Sr. Member
  • ****
  • Posts: 1123
  • "IF YOUR NOT FIRST YOUR LAST"
Re: Parts needed for my Challenger
« Reply #6 on: October 05, 2009 - 08:08:19 PM »
I have
19.   Sill plates (New or in excellent condition)
20.   Trunk Floor Extensions (New)
21.   Trunk Pan (New)



http://www.cuda-challenger.com/cc/index.php?topic=62327.0
:burnout::22yikes::burnout:    www.ronpaul2008.com
71 Challenger 4spd   www.conservativepunk.com
03 Ram diesel 6spd    http://s105.photobucket.com/albums/m222/chucknutz/1971%20Challenger/

Offline burdar

  • Sr. Resident
  • ******
  • Posts: 5925
Re: Parts needed for my Challenger
« Reply #7 on: October 06, 2009 - 10:57:13 AM »
If you don't find someone with the parts you need, here are some companies that I have dealt with and know they have the parts you need...

Mike at BE&A has new headlight rings, stainless steel fuel tank straps, the three piece tail panel trim and all of the slapstick parts.(new chrome housing, clear plastic gear selector and black plastic slider piece)


Tom at R/TSpecialties will have any clips or bolts or screws you'll need.  I also bought new wheelwell mouldings from him.  He also has a good selection of weatherstripping along with the body plug kits.

I did a lot of checking around on gas tank prices and manufacturers.  I got my Spectra tank(wich is one of the good ones) from RockAuto.com.  They had a great price and shipped it to me in record time.
 

Offline moparclown

  • Resident
  • *****
  • Posts: 4335
Re: Parts needed for my Challenger
« Reply #8 on: October 06, 2009 - 07:42:15 PM »
I have a new carpet for a challenger that was bought in 1978 and never used.
I have pics for you,whats your email?

Offline mopardave

  • Sponsor
  • Resident
  • ***
  • Posts: 3294
  • 1973 Challenger F8 in and out, 68 383,727 3.23 pos
    • rosevillemoparts
Re: Parts needed for my Challenger
« Reply #9 on: October 06, 2009 - 08:53:52 PM »
there is about 3 or 4 items on your list that I dont have, Most of this I have in stock, if you'd like send me an updated list and i can price it for you to parts@mikeriehls.com

thanks
Mopar Dave
Rosevillemoparts.com

if I haven't replied to your post or PM email me direct    dradcliffe@mikeriehls.com




70 FK5 Challenger RT/SE
70 FC7 70 Road Runner - Sold
71 FM3 Challenger RT
71 Cuda (in process for restoration)
73 F8 Challenger
1990 XJ - sold
2000 Dakota Quad Cab
2010 Ram Crew Cab 2500 4wd - sold
2015 Ram Crew Cab 2500 4wd Black Out