Fuel Bowl Holley - Inlet Thread Stripped

[cwestra]

The inlet threads are stripped in the center carb on my 6-Pak set-up.  I assume there are no fixes for this.  Can I buy a bowl for it though?

[Chryco Psycho]

Holley will sell the bowls seperatly but will not ship to Canaduh 
 & yes you do need to replace it unforrtunatly

[moper]

CP... do you know which carb has the same bowl? The 4bbl ones? I dont recall which ones work. I have a few you can have but the are not 6bbl... so the vent setup is wrong. I swear there was some 600CFM 4bbl that used the exact same centerhung bowl with the vent and vapor nipple...

[Chryco Psycho]

I believe you are correct on the center carb Only , the outboard is totally unique

[Moparal]

Here's a center bowel, I saw a link for an end also


http://cgi.ebay.com/ebaymotors/1969-71-BOWL-SIX-PACK-CENTER-CARB-MOPAR-NEW-HOLLEY_W0QQcmdZViewItemQQhashZitem3ca5bb26d8QQitemZ260478543576QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

[moper]

CW if you cant find anything let me know. I can buy it and then ship to you. But last time I shipped to the great white north it took 3 weeks to clear the border.

[Chryco Psycho]

I believe Cwestra is in the US so he should have no issue getting one
Me on the other hand 

[cwestra]

CW if you cant find anything let me know. I can buy it and then ship to you. But last time I shipped to the great white north it took 3 weeks to clear the border.

Here's a couple of pictures of the bowl, moper.  I'm certainly interested in what it would cost me through you.  I have not done any checking, as I was not sure where to look or what the part number even was.  I'm located in Indiana.  Let me know what you think.  Much appreciated.

[cwestra]

Here's a center bowel, I saw a link for an end also


http://cgi.ebay.com/ebaymotors/1969-71-BOWL-SIX-PACK-CENTER-CARB-MOPAR-NEW-HOLLEY_W0QQcmdZViewItemQQhashZitem3ca5bb26d8QQitemZ260478543576QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Thanks for the great lead, Moparal.  Much appreciated.

[cwestra]

CW if you cant find anything let me know. I can buy it and then ship to you. But last time I shipped to the great white north it took 3 weeks to clear the border.

I can get one for $45 plus shipping, moper.  Would your price be any better?  Thanks.

[moper]

I was trying to get around the "shipping to canada" Deal. I cant buy things any cheaper than you could....lol.

[Moparal]

If you're not running that vent to the valve cover breather, then a regular bowel will work. I guess you know that tho

[cwestra]

If you're not running that vent to the valve cover breather, then a regular bowel will work. I guess you know that tho

I will be using the vent.  I thought it went to the air cleaner though.  I ended up going with the eBay lead you provided.  The other ones did not have the "Holley" cast in and the vent tube was not there.  I called Holley and they said they could make one but that it could take up to 2 weeks.  I needed one ASAP.  Thanks again for the lead.  It turned out to be extremely helpful.