News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Line up from the crank and power steering pulley  (Read 1162 times)

    Offline 4yuckfous

    • Jr. Member
    • **
    • Posts: 127
    Line up from the crank and power steering pulley
    « on: September 21, 2009 - 05:04:53 PM »
    I have a problem with the line up from the crank pulley and the steering pump pulley.
    The steering pump is about 1 cm (1/2") to far in front.
    How can I adjust this mistake?
    Can I put some washers under the crank pulley?
    Thanks for a feedback
    Greetings from Switzerland
    Andrea
    Logged
    The streets don't get wider, if you drive slower !


    Offline 422STROKER

    • Sr. Resident
    • ******
    • Posts: 5386
    • Member Since 6/3/06
    Re: Line up from the crank and power steering pulley
    « Reply #1 on: September 21, 2009 - 05:15:45 PM »
    Do you have a pic?  What type of pump and block?

    1/2" is too much, something isn't right there.  How about the crank pulley, is it stock?

    Tom

    Logged
    Tom
    12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

    wagesofsin

    • Guest
    Re: Line up from the crank and power steering pulley
    « Reply #2 on: September 21, 2009 - 06:10:58 PM »
    you may have the wrong crank pulley.
    and as tom mentioned, a pic would be most helpfull.

    Logged

    Offline 4yuckfous

    • Jr. Member
    • **
    • Posts: 127
    Re: Line up from the crank and power steering pulley
    « Reply #3 on: September 22, 2009 - 01:01:33 AM »
    Here some pics
    Logged
    The streets don't get wider, if you drive slower !

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Line up from the crank and power steering pulley
    « Reply #4 on: September 22, 2009 - 01:22:07 AM »
    you cannot put washers behind the crank pulley without causing problems , you either need a different crank & or PS pulley or try pressing the PS pulley on backwards
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline 4yuckfous

    • Jr. Member
    • **
    • Posts: 127
    Re: Line up from the crank and power steering pulley
    « Reply #5 on: September 22, 2009 - 03:07:51 PM »
    o.k. I understand, without washers!
    what for other possibilities do I have ?
    I can't order 10 different pulleys in US.....
    Logged
    The streets don't get wider, if you drive slower !

    Offline dutch

    • Sr. Resident
    • ******
    • Posts: 6944
    Re: Line up from the crank and power steering pulley
    « Reply #6 on: September 22, 2009 - 03:21:08 PM »
    I`d visit a local turn / mill shop with that problem.  just ask them how much for making one that fits...  and try some different shops too, that might make a big difference in price...  :2cents:
    Logged
    *** Bart ***

    Offline 422STROKER

    • Sr. Resident
    • ******
    • Posts: 5386
    • Member Since 6/3/06
    Re: Line up from the crank and power steering pulley
    « Reply #7 on: September 22, 2009 - 05:54:11 PM »
    Looks like the crank pulley is wrong?  The PS pulley looks ok to me.

    Tom

    Where did you get the aluminum pulley?



    Logged
    Tom
    12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

    Offline 4yuckfous

    • Jr. Member
    • **
    • Posts: 127
    Re: Line up from the crank and power steering pulley
    « Reply #8 on: September 23, 2009 - 12:52:41 AM »
    @ Tom
    I get the parts from our US trip last year.
    I bought the pulley from Jerrys Auto Supply, WA.
    If I lock your and my pictures, both pulley's are on axis.
    Mine have a space from about 2-3 mm in back but not 10 mm. :clueless:
    This 2-3 mm space is to less.
    I think I have to produce a new one with the ~10 mm off axis to the rear side.... :pullinghair:
    Logged
    The streets don't get wider, if you drive slower !

    Offline 422STROKER

    • Sr. Resident
    • ******
    • Posts: 5386
    • Member Since 6/3/06
    Re: Line up from the crank and power steering pulley
    « Reply #9 on: September 23, 2009 - 03:43:38 PM »
    Try to get some measurements of the crank pulley, I have a couple lying around in my pile I can see if I have a proper crank pulley for you.  I can check your measurements vs mine.

    Tom
    Logged
    Tom
    12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

    Offline 4yuckfous

    • Jr. Member
    • **
    • Posts: 127
    Re: Line up from the crank and power steering pulley
    « Reply #10 on: September 25, 2009 - 12:22:39 AM »
    Good morning Tom
    I was yesterday on a "turning lathe" shop.
    They make me a new pulley.
    The offset is incredibly, 10,8 mm.

    If that doesn't work, I will let you now.
    Thank you for your support
    Logged
    The streets don't get wider, if you drive slower !

    Offline 422STROKER

    • Sr. Resident
    • ******
    • Posts: 5386
    • Member Since 6/3/06
    Re: Line up from the crank and power steering pulley
    « Reply #11 on: September 26, 2009 - 07:50:09 AM »
    Ok, hope you get it sorted out soon.

    Tom :2thumbs:
    Logged
    Tom
    12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

    Offline 4yuckfous

    • Jr. Member
    • **
    • Posts: 127
    Re: Line up from the crank and power steering pulley
    « Reply #12 on: November 15, 2009 - 02:00:39 AM »
    Thank you guys.

    Now I think it looks o.k.
    Logged
    The streets don't get wider, if you drive slower !

    Offline 422STROKER

    • Sr. Resident
    • ******
    • Posts: 5386
    • Member Since 6/3/06
    Re: Line up from the crank and power steering pulley
    « Reply #13 on: November 15, 2009 - 01:31:53 PM »
    Looks good.

    Tom :2thumbs:
    Logged
    Tom
    12.77 @ 108.87 15" Street Drag radial tires 3.23 gear
    Pages: [1]
    « previous next »