Author Topic: Possible.? Every thing to make my A-body 4 on floor.??? (Read 2667 times)

cowboy · « **on:** November 12, 2009 - 03:10:15 PM »

-
Will it be possible, at a resonable price, to get every thing needed to go from Aut. into four on the floor in my 68 Cuda..

All parts from one place - from pedals to the smallest spring an washer..

What do you think I have to count up

72rtchallenger · « **Reply #1 on:** November 12, 2009 - 08:05:27 PM »

http://cgi.ebay.com/ebaymotors/MOPAR-DUSTER-DART-DEMON-A-BODY-4-SPEED-CONVERSION-340_W0QQcmdZViewItemQQhashZitem4cebf4d829QQitemZ330376206377QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

this listing is about as complete setup as i have found for $1350 ,have never dealt with this seller but have seen him list several like this,,its for a small block,but he might have a big block, i converted mine piece by piece and have maybe saved some,,but mine is an ebody and i had my transmission rebuilt which is $$$,,so you would have to trust him as far as the tranny condition

Chryco Psycho · « **Reply #2 on:** November 13, 2009 - 12:25:32 AM »

a friend of mine has everything & most of it is new parts

cowboy · « **Reply #3 on:** November 13, 2009 - 02:50:54 AM »

-
As I see it, - somethings missing..

Springs, - something between linkage and fork, - something to fit the carframe. - - anything else..

And then a flywheel, - clutch and

the bearing for the clutch, whats it called.

"Chryco" you please find out what your friend got, and at what price..

Chryco Psycho · « **Reply #4 on:** November 13, 2009 - 02:57:37 AM »

there is a bunch missing in that pic
Clutch & flywheel , pivot balls & belhousing mount for the Z bar , shift levers on the tranny , lower adjuster rod for the clutch , release brg & pilot brg , rubber fork boot , front belhousing shield , shifter handle , frame plate for the Zbar pivot

cowboy · « **Reply #5 on:** November 13, 2009 - 02:59:21 AM »

Quote from: Chryco Psycho on November 13, 2009 - 02:57:37 AM

there is a bunch missing in that pic
Clutch & flywheel , pivot balls & belhousing mount for the Z bar , shift levers on the tranny , lower adjuster rod for the clutch , release brg & pilot brg , rubber fork boot

ja20 · « **Reply #6 on:** November 13, 2009 - 12:58:44 PM »

Hi, did you look at Brewers Performance Inc www.brewersperformance.com/

cowboy · « **Reply #7 on:** November 13, 2009 - 02:15:42 PM »

Quote from: ja20 on November 13, 2009 - 12:58:44 PM

Hi, did you look at Brewers Performance Inc www.brewersperformance.com/

Now I have, -

I think I'm gonna buy another car instead, - Packages start at $3487.50.

cowboy · « **Reply #8 on:** November 20, 2009 - 06:11:26 AM »

-
No longer in need..

ja20 · « **Reply #9 on:** November 24, 2009 - 06:13:10 PM »

I know you said you don't need but http://www.forabodiesonly.com/mopar/showthread.php?t=80778

cowboy · « **Reply #10 on:** November 24, 2009 - 06:20:08 PM »

-
Thanx...
""4 speed package sold. third member still for sale""

Author Topic: Possible.? Every thing to make my A-body 4 on floor.??? (Read 2667 times)

cowboy

Possible.? Every thing to make my A-body 4 on floor.???

72rtchallenger

Re: Possible.? Every thing to make my A-body 4 on floor.???

Chryco Psycho

Re: Possible.? Every thing to make my A-body 4 on floor.???

cowboy

Re: Possible.? Every thing to make my A-body 4 on floor.???

Chryco Psycho

Re: Possible.? Every thing to make my A-body 4 on floor.???

cowboy

Re: Possible.? Every thing to make my A-body 4 on floor.???

ja20

Re: Possible.? Every thing to make my A-body 4 on floor.???

cowboy

Re: Possible.? Every thing to make my A-body 4 on floor.???

cowboy

Re: Possible.? Every thing to make my A-body 4 on floor.???

ja20

Re: Possible.? Every thing to make my A-body 4 on floor.???

cowboy

Re: Possible.? Every thing to make my A-body 4 on floor.???