question about T/A heads for sale

[sloop]

I need some help here.  I have found a set of heads on craigslist that are nearby my house and cinsidering going to look at them. the add claims matching 340 ta heads and intake... in the picture there is a 4bbl intake, can anyone look at this add and steer me in the right direction

http://charlotte.craigslist.org/pts/1484359414.html

[Moparal]

Im not a t/a authority , but I dont see the elongated slots for the pushrods like on the t/a heads. They make a non 915 ta head I do know that

[Katfish]

Take a look at this

http://board.moparts.org/ubbthreads/showflat.php?Cat=0&Board=QuestionAnswer&Number=5089645&Searchpage=1&Main=5089083&Words=identify+%2BT%2FA+%2Bheads&topic=&Search=true#Post5089645

[72rtchallenger]

I would ask for the casting number on the heads and see if there real ta heads

[Alaskan_TA]

T/A head 101

915 castings, all the same - T/A or not.

Letters at the bottom of the head may be J, U, O or another letter that escapes me right now. These letters have no meaning.

The ONLY way to tell a T/A head is to look for the offset pushrod holes next to the intake ports. 

[Alaskan_TA]

There is also a X head T/A casting. These came out about 1974 as an over the counter replacement part.

[Slotts]

Ask the seller if these heads have been magnafluxed. If they haven't, you might want to see if you can negotiate for this service to be done.
That is the only way to know exactly what condition they are in before forking over the cash.

Slotts

[72rtchallenger]

T/A head 101

915 castings, all the same - T/A or not.

Letters at the bottom of the head may be J, U, O or another letter that escapes me right now. These letters have no meaning.

The ONLY way to tell a T/A head is to look for the offset pushrod holes next to the intake ports. 

good to know