Need fitting for Auto Meter gauge?????

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: 1 [2]

    Author Topic: Need fitting for Auto Meter gauge?????  (Read 2345 times)

    Offline GoodysGotaCuda

    • Sr. Resident
    • ******
    • Posts: 5392
    Re: Need fitting for Auto Meter gauge?????
    « Reply #15 on: December 06, 2009 - 07:47:19 PM »
    Quote from: 72challorange on December 06, 2009 - 04:39:25 PM
    Goody it is 1/4...

    Tom

    The hole on the right side is 3/8 though.

    http://www.sportcompactonly.com/manuals/Brand/Edelbrock/7576.pdf


    There is one 1/4" and two 3/8" holes on that manifold. In the coolant circuit at least. My manifold is below, it's a performer rpm which has the same ports as the air gap. The left is 1/4" (autometer electric water temp gauge), the brass temp sender next to it is 3/8" (painless e-fan temp sender), the t-stat is in the middle, to the right of the t-stat is another 3/8" plug.
    « Last Edit: December 06, 2009 - 07:55:42 PM by GoodysGotaCuda »
    Logged
    Build Page: Goody's 'Cuda Build Page
    1976 Dodge Warlock
    1972 Barracuda - 5.7 Hemi + T56 Magnum

    Wheel & Tire Specs:Link


    Offline Glennster

    • Full Member
    • ***
    • Posts: 879
    Re: Need fitting for Auto Meter gauge?????
    « Reply #16 on: December 06, 2009 - 08:12:41 PM »
    We just got back, I forgot the camera. I would have liked to show pictures of this. It '' WAS '' a 1/4'' or maybe a 5/16'' hole. But it was not 3/8, I know some of you think this is not possible....but I have no reason to BS anyone.

     I just drilled it with a 9/16'' drill bit and tapped it with a 3/8'' NPT tap.

    NOW, it is 3/8'' and the fitting is in place.

    Thanks for the help!!!
    Logged

    Offline 422STROKER

    • Sr. Resident
    • ******
    • Posts: 5386
    • Member Since 6/3/06
    Re: Need fitting for Auto Meter gauge?????
    « Reply #17 on: December 06, 2009 - 08:17:51 PM »
    Goody did you look at my link?

    Kit Contents
    1 – 1/8-27 Pipe Plug
    1 – ¼-18 Pipe Plug
    1 – 3/8-18 Pipe Plug

    Tom :wave:
    Glennster glad you got it sorted. :cheers:
    Logged
    Tom
    12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

    Offline brads70

    • C-C.com Expert
    • ********
    • Posts: 18747
    Re: Need fitting for Auto Meter gauge?????
    « Reply #18 on: December 06, 2009 - 10:17:38 PM »
     :clapping: Glad you got it all sorted out! :2thumbs:
    Logged
    Brad
    1970 Challenger 451stroker/4L60 auto OD
    Barrie,Ontario,Canada
    Proud to own one of the best cars ever made!!!!!

    My restoration thread 
    http://www.cuda-challenger.com/cc/index.php?topic=59072.0
     My handling upgrade post
    http://www.cuda-challenger.com/cc/index.php?topic=73985.0
    Pages: 1 [2]
    « previous next »