Remove the factory undercoat?

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: 1 2 [3]

    Author Topic: Remove the factory undercoat?  (Read 15699 times)

    Offline moprr

    • Jr. Member
    • **
    • Posts: 343
    Re: Remove the factory undercoat?
    « Reply #30 on: December 12, 2009 - 02:53:50 PM »
    I started stripping the undercoating with a heat gun but I just bought some soybean oil I am going to try a spot shortly I will let you know if it works.
    Logged


    Offline Cuda Cody

    • Resident
    • *****
    • Posts: 3988
    • Vancouver, WA
    Re: Remove the factory undercoat?
    « Reply #31 on: December 12, 2009 - 07:05:18 PM »
     :popcorn:


    Quote from: moprr on December 12, 2009 - 02:53:50 PM
    I started stripping the undercoating with a heat gun but I just bought some soybean oil I am going to try a spot shortly I will let you know if it works.
    Logged
    The funniest thing about this particular signature is that by the time you realize it doesn't say anything it's to late to stop reading it.

    Offline Cuda Cody

    • Resident
    • *****
    • Posts: 3988
    • Vancouver, WA
    Re: Remove the factory undercoat?
    « Reply #32 on: December 14, 2009 - 11:35:33 PM »
    I got a new box of popcorn.....  :popcorn:

    Quote from: moprr on December 12, 2009 - 02:53:50 PM
    I started stripping the undercoating with a heat gun but I just bought some soybean oil I am going to try a spot shortly I will let you know if it works.
    Logged
    The funniest thing about this particular signature is that by the time you realize it doesn't say anything it's to late to stop reading it.

    Offline Topcat

    • C-C.com Expert
    • ********
    • Posts: 15376
    • Member since 9/16/04
    Re: Remove the factory undercoat?
    « Reply #33 on: December 15, 2009 - 12:09:52 AM »
    Quote from: C O D Y on December 14, 2009 - 11:35:33 PM
    I got a new box of popcorn.....  :popcorn:

    I swear you got darker since your last post.
    Logged
    Mike, Fremont, CA.

    Offline IMNCARN82

    • Resident
    • *****
    • Posts: 3547
    • LeDZeP
    Re: Remove the factory undercoat?
    « Reply #34 on: December 15, 2009 - 12:24:31 AM »
    I did mine last Winter. It came off nice with a Milwaukee heat gun and scrapers.Then a shot with brake cleaner and scotch-brite pad.The cleaner softens it up,Then it clogs up the scotch-brite. It cleaned up nice.My shoulders/back hurt for a month.  soy bean oil???  That's funny... where it was dark and saturated with oil it came right off. Hmmmm. :popcorn:   
    « Last Edit: December 15, 2009 - 12:29:52 AM by IMNCARN82 »
    Logged
    '73 340 5 speed,RMS,BAER,... "Supercuda" (O[   ]||||[   ]O)  
    '69 Dodge Charger 383,Auto                  (OiiiiiiiiiiIiiiiiiiiiiO)
    13' Challenger R/T BlacktoP  6spd. (OO________OO)
    71' Demon
    75' Duster
    87' Conquest TSI
    56' Plaza
    Boulder CO
    Robert    "cuda bob"

    Offline Cuda Cody

    • Resident
    • *****
    • Posts: 3988
    • Vancouver, WA
    Re: Remove the factory undercoat?
    « Reply #35 on: December 15, 2009 - 04:46:46 PM »
    That looks good.  How long do you think it took?


    Quote from: IMNCARN82 on December 15, 2009 - 12:24:31 AM
    I did mine last Winter. It came off nice with a Milwaukee heat gun and scrapers.Then a shot with brake cleaner and scotch-brite pad.The cleaner softens it up,Then it clogs up the scotch-brite. It cleaned up nice.My shoulders/back hurt for a month.  soy bean oil???  That's funny... where it was dark and saturated with oil it came right off. Hmmmm. :popcorn:
    Logged
    The funniest thing about this particular signature is that by the time you realize it doesn't say anything it's to late to stop reading it.

    Offline boydsdodge

    • Full Member
    • ***
    • Posts: 582
    • Top end's unlimited....Aaaauuuuugghhhhh!!!!!!!!!!!
      • Boydsdodge
    Re: Remove the factory undercoat?
    « Reply #36 on: December 15, 2009 - 06:36:16 PM »
    I used a needle scaler, it took all the thick stuff of no problem along with any scaly rust. Two in one.
    Then I hit it with a wire wheel where needed.
    Loud, but worked with no fumes or wet slop.
    http://ezinearticles.com/?Needle-Scaler-and-Debris-Removal&id=957262
    I bought mine from Princess Auto here in Ontario which I think is very much the same as Harbour freight in the states.
    Logged
    Jackson from Toronto.

    Offline IMNCARN82

    • Resident
    • *****
    • Posts: 3547
    • LeDZeP
    Re: Remove the factory undercoat?
    « Reply #37 on: December 15, 2009 - 07:21:58 PM »
    I'd say it took about a week. Doing a section every day. The more you do the better you get a system down and you speed up. I'd work a 2'x2' area,Then move on. The nooks and cranny's take some time. I had a little pillow with me so I could relax my neck some.Working construction...I have a "get it done" attitude. Crank up the tunes and scrape away!!  :working:
    Logged
    '73 340 5 speed,RMS,BAER,... "Supercuda" (O[   ]||||[   ]O)  
    '69 Dodge Charger 383,Auto                  (OiiiiiiiiiiIiiiiiiiiiiO)
    13' Challenger R/T BlacktoP  6spd. (OO________OO)
    71' Demon
    75' Duster
    87' Conquest TSI
    56' Plaza
    Boulder CO
    Robert    "cuda bob"

    Offline Migmaster

    • Jr. Member
    • **
    • Posts: 14
    Re: Remove the factory undercoat?
    « Reply #38 on: December 15, 2009 - 09:42:08 PM »
    Check this out. I stopped by a guys house near Birmingham several weeks ago looking at a car for sale and he just completed stripping the undercoating (and it was really thick) from a 70 Cuda. He used a rented steam cleaner and it took him about 6 hours. He sprayed it down with some type of citrus cleaner prior to blasting but it came out super clean and you can still see alot of the factory primer and marks. I took several pics because I was amazed at the job it did.
    Logged

    Offline boydsdodge

    • Full Member
    • ***
    • Posts: 582
    • Top end's unlimited....Aaaauuuuugghhhhh!!!!!!!!!!!
      • Boydsdodge
    Re: Remove the factory undercoat?
    « Reply #39 on: December 17, 2009 - 10:17:54 PM »
    wow that ones in good shape
    no rust that i see.
    Logged
    Jackson from Toronto.

    Offline moprr

    • Jr. Member
    • **
    • Posts: 343
    Re: Remove the factory undercoat?
    « Reply #40 on: December 18, 2009 - 09:43:52 PM »
    I tried soy bean oil it's been soaking for about 10 hours it may be just softening up the top a bit. To me it looks like you would need to soak it and scrape multiple time before you get anywhere.   I am going to see what it looks like in a day and I may apply more soy bean oil.
    Logged

    Offline Migmaster

    • Jr. Member
    • **
    • Posts: 14
    Re: Remove the factory undercoat?
    « Reply #41 on: December 19, 2009 - 11:44:23 AM »
    It was in amazing condition and I was told it was a "V" code car but I didn't see the vin to verify since the car was stripped down. I went by to make an offer on the 70 duster he has for sale and he told me the product he used was SC-101 asphalt remover from Etowah Chemical in Birmingham, he rented the steam cleaner from the same place. I would think any steam cleaner sales facility would have a similar product. He said he let it soak for 2-3 hrs and had to re-apply twice to get it all off but it was still a slow process but the results speak for themselves. I found this link on the net for the product. http://www.etowahchemicals.com/PIB/index.htm
    Maybe one day I can afford a Cuda!!
    Logged

    Offline Cuda Cody

    • Resident
    • *****
    • Posts: 3988
    • Vancouver, WA
    Re: Remove the factory undercoat?
    « Reply #42 on: December 19, 2009 - 12:35:14 PM »
    I've gotten about ½ way done doing it with the torch and putty knife.  It's not difficult and I'm doing like others have said... a couple hours here and there.  My guess is with a torch and knife it will be about 10 to 12 hours when it's all done.
    Logged
    The funniest thing about this particular signature is that by the time you realize it doesn't say anything it's to late to stop reading it.

    Offline moprr

    • Jr. Member
    • **
    • Posts: 343
    Re: Remove the factory undercoat?
    « Reply #43 on: December 22, 2009 - 08:13:25 PM »
    No luck with soy bean oil it's been soaking for a few day's.  Heat and a scraper is the way to go.
    Logged

    Offline 426HEMI

    • Sr. Resident
    • ******
    • Posts: 5187
    • My M46 Barracuda! Member Since:October 01, 2005
    Re: Remove the factory undercoat?
    « Reply #44 on: December 22, 2009 - 09:12:54 PM »
    I hope it will do good for you.  I might try that also for my car
    Logged
    Got a pretty good start on my M46 optioned Barracuda restoration but now it is on hold till I can gather more funds.  Still need a few parts for it.  SIU Graduate 75 AAS Automotive Tech, 94 BS Advanced Tech Studies, 1997 MSED Workforce Education and Development

    1970 M46 Barracuda
    1998 Dodge Darango

    Gordon
    Pages: 1 2 [3]
    « previous next »