Deck lid alignment

[Chlngrcrzy]

I need to have my deck lid move to one side a bit, how do you move it? do you put washers on the pivoting bolt on one or the other side?

[rallye73]

Believe or not, most body guys will just raise the lid and give it a good push towards the side they want it to move. Basically tweaking the hinges slightly. We did it to my car and the lid lines up great.

[coupman35]

you have to ajust the trunk hole down you will have to move it to one side so when it close it will move .Am talking about the piece thar in the trunk not the one on the lid.That how i did on my car.

[72cudamaan]

Believe or not, most body guys will just raise the lid and give it a good push towards the side they want it to move. Basically tweaking the hinges slightly. We did it to my car and the lid lines up great.

   

[CHL2T]

  x 2 Works great on the hood too

[Chlngrcrzy]

Ok. I guess i wont stress over it at this point. Thanks guys 

[Scat Pack Fever]

Loosen the top bolt on one side and the bottom bolt on the other side. Move the deck lid over just a bit and tighten them up. Close the deck lid slowly just in case you moved it too far so you don't rub the deck lid on the edge of the quarter panel.