Author Topic: Heater box support rod  (Read 2248 times)

Offline lime73

  • Jr. Member
  • **
  • Posts: 204
Heater box support rod
« on: January 04, 2010 - 09:09:31 AM »
Does anyone have a picture of the rod that supports the heater box up to the cowl?  My car hasnt had one since i took ownership.  Does anyone know where i can get my hands on one? Thanks and HAPPY NEW YEAR.




Offline Bullitt-

  • Permanent Resident
  • *******
  • Posts: 12167
  • Better Things To Come Member Since 2/16/06
Re: Heater box support rod
« Reply #1 on: January 04, 2010 - 09:14:51 AM »
Sorry no pic. but I'd make one out of a battery tie down rod or some all thread if push came to shove.
Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
Screwed by Photobucket!

Offline lime73

  • Jr. Member
  • **
  • Posts: 204
Re: Heater box support rod
« Reply #2 on: January 04, 2010 - 10:33:50 AM »
I was thinking about a battery hold down.  Anyone know how long the rod should be?.  I am assuming it goes through the heater box in the front ( side toward passenger compartment because there is a hole there that is broken out a bit on my box.

Offline sadil340

  • Sr. Member
  • ****
  • Posts: 1562
Re: Heater box support rod
« Reply #3 on: January 04, 2010 - 10:59:12 AM »
I have to dig mine out but will post a picture of it if someone else doesn't get there first.
1970 Cuda 340 4-speed
3:55 SureGrip
Owned since 1974
Bought from original owner

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Heater box support rod
« Reply #4 on: January 04, 2010 - 12:24:54 PM »
I assume yur car has A/C , if not there is just a J hook inside the right vent

Challenger - You`ll wish You Hadn`t

Offline lime73

  • Jr. Member
  • **
  • Posts: 204
Re: Heater box support rod
« Reply #5 on: January 04, 2010 - 02:04:01 PM »
non a/c car. what should this hook look like??

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Heater box support rod
« Reply #6 on: January 04, 2010 - 02:36:13 PM »
then thee is no strap , the hook has a small bolt on the outside of the heater box near the top of the box under the vent from the cowl , the J bolt is inside the heater box & hooks up into the metal cowl vent .

Challenger - You`ll wish You Hadn`t

Offline 4 speed fish

  • Full Member
  • ***
  • Posts: 849
Re: Heater box support rod
« Reply #7 on: January 04, 2010 - 07:12:50 PM »
I have 1 if you want it.

Offline lime73

  • Jr. Member
  • **
  • Posts: 204
Re: Heater box support rod
« Reply #8 on: January 05, 2010 - 07:09:35 AM »
let me know what you want for it. thanks

Offline coupman35

  • Full Member
  • ***
  • Posts: 506
  • It going to be FUN
Re: Heater box support rod
« Reply #9 on: January 05, 2010 - 10:53:02 AM »
can you post a pic of it ad like to see what it look like thanks
1941 Dodge truck 340cu
1935 ford 3window coupe 327cu
1965 Acadian Beaumont Convertible 283cu
1973 Challenger 318cu

Offline Slotts

  • Sr. Member
  • ****
  • Posts: 1893
Re: Heater box support rod
« Reply #10 on: January 06, 2010 - 06:23:32 PM »
can you post a pic of it ad like to see what it look like thanks


Here you go...



Slotts