Side Body Trim Clips, are they available???

[Glennster]

I was getting out of my car and my jacket caught the side body molding, so, from the front of the fender, back about 2 feet, I pulled the trim off of those nice little factory clips. Oh joy ! ! !  That made me very happy  : - (  NOT!

 Are the factory clips still available or should I just use some of the Double Face tape like they sell at Autozone???

[MEK-Dangerfield]

I can't speak for the clips, but I know I have seen glue for body side moldings and such.

If you used the 3M double backing tape, would it make the molding bulge out too far?

[72rtchallenger]

are side molding clips made anything like the trunk molding clips? may be they would work,just a thought 
would any of these work
http://www.mrgusa.com/pdfs/34-39mclips.pdf

[Glennster]

MEK,
  I've seen some tapes like 3M's VHB (Very High Bond) that are very thin. Great hold power.

72,
  I didn't pay attention to the clips. I think I need to take a few pictures, maybe clips are available.

[duodec]

Original trim is not flat/solid back like the stuff they sell at part stores; any tape adhesive would need to be very thin and transparent or it would show.

RT Specialties lists molding clips for Barracudas (1970 and 1971-1974); the 1971-4 clips look identical to the ones on my Challenger; no idea if the '70s would work on yours but it might be worth a call.

http://www.rtspecialties.net/proddetail.asp?prod=1000019