Author Topic: Re: E-Body Convertible Parts 4 Sale (Read 3986 times)

jt4406 · « **on:** December 10, 2001 - 12:17:53 PM »

Hey! You wouldn't have any convertible e body shells out back somewhere? I am interested in some metal from under the body. Email me at lgtackett@setel.com if you have anything along that line.
Jess T.

bullitt · « **Reply #1 on:** March 13, 2002 - 07:06:24 PM »

Yo, I dont know if you've got one but I have been having some trouble finding convertible tops. I'm not sure if they're on here cause I havent had time to look and I just joined. In case anyone knows where I can find some (especially for a 67 cuda, dont know how the fitting for different years works) let me know. My email is mr68charger@aol.com or lieutenant_bullitt@hotmail.com

Conv383 · « **Reply #2 on:** March 15, 2002 - 11:24:46 AM »

Do you have the "C-Channel" that holds the front gasket to the Top? My current one is half rusted out and does not hold the gasket in place so the seal to the windshield frame is not good.

Bullitt:

If you are talking about the actual material for Convt. tops go to www.YearOne.com. They should have your top and it is excellent quality. Good Luck!

To Bullitt:

it isn't part of the material of the top it is acutually a steel piece that runs the length of the front of the top. it screws down to the frame of the top and secures the material to the frame and also holds the gasket in the "C" channel part.

plumcrazy102 · « **Reply #3 on:** March 28, 2002 - 07:20:02 PM »

I am looking for the driver's side a pillar trim for the convertible. this is the wide stainless steel piece. I would be interested in purchasing all of the windshield trim. contact me @ plumcrazy102@yahoo.com

BadHemi · « **Reply #4 on:** March 31, 2002 - 07:01:43 PM »

Sorry Guys, everything is sold now.

stilwuvme · « **Reply #5 on:** April 21, 2002 - 12:33:39 PM »

Do you have any of those plastic hold down staps for the manual top? thanx.........Mike