Need help ! Clutch switch for 70 Cuda

[sportony]

Delco-Remy Clutch switch (70 cuda 440 4 speed).  Clutch switch that connects to the clutch pedal, so the car will start as the clutch is engaged.  Part #  2947858.  (Not even sure if this part is stock or not).

The spade terminal broke off flush with the back of the switch, so I can't seem to even solder the wire back to it.  Any ideas as to where I might find one of these ?

[Chryco Psycho]

Very difficult to find & expensive to buy but I bet Slotts can fix it for you

[ShelbyDogg]

I would scrape whatever is left with a razor blade or x-acto knife to get it as clean as possible, then try the solder deal again using a freshly stripped and tinned wire. Once you get it to stay, wire tie it to the switch or glue it down so it doesn't move everytime you unplug it.

[PlumCrazyRTSE]

I think that this is what you're looking for
http://www.rosevillemoparts.com/product_info.php/p/clutch-safety-switch-70-74-e-body/products_id/2576

[vinb]

Nice switch assembly , but for $360.00, I would put a push button switch under the dash if your worrying about starting it in gear..

I mounted one on my Cuda for $8.00. I found an original used but good condition one at a sway meet later for $35.00.

[sportony]

OK.  Well, I did manage to get it started by just grounding the green wire to a dash bolt.  It isn't exactly original, but at least it starts now...... 

Guess I'll wory about coming up with the $$$ for a new or used one later.  Man, I can't believe those things are that expensive......  I do enjoy being different, but at that cost ? That's exactly why all my chevy loving friends can't understand why I drive a mopar.   

Anyways, thanks for the tips and advice guys.

[Bullitt-]

catch up with member Slotts...Yes He Can...

http://www.cuda-challenger.com/cc/index.php?topic=64880.0