vinyl top adhesive

[bb71challenger]

Any specific brand to use or stay away from? Do I need to put the moulding around the pillar right away or can I leave it for a while? The car is in a garage btw. I read an article a while back and feel confident that I can put the top on myself but am I just fooling myself or is it as easy as it sounds? Thanks for any advice or tips you guys have.

[bb71challenger]

I have been looking and cant find any. All kinds on YearOne and other places but cannot find vinyl top adhesive. Can anyone at least point me to a site that carries what I need?

[Chlngrcrzy]

i am going to be putting my own vinyl top on my car this next month also. I bet we both could use a few tips from ya all that have done this before. 

[torredcuda]

http://multimedia.3m.com/mws/mediawebserver?66666UuZjcFSLXTt4xMcNxT_EVuQEcuZgVs6EVs6E666666--


Legendary says to use spray trim adhesive(3M?) Decent directions also.

http://www.legendaryautointeriors.com/files/vinyl%20top%20installation%20guide.pdf

I would use the Super not the general trim adhesive

http://www.jamestowndistributors.com/1/1/3579-glues-adhesives-3m-super-trim-adhesive.html

Any local auto parts that carries body supplies should have it.

[Bullitt-]

From http://www.moparmusclemagazine.com/howto/25738_horse_skinning/index.html

DAP Weldwood Contact Adhesive to attach vinyl tops. Since this is spray grade, there's no need to dilute it.

by the gallon
http://www.yourautotrim.com/noname37.html

[bb71challenger]

Thanks guys! That gives me a lot better direction and that is the article I read so that is a nice reference to go by.