Author Topic: Challenger Templates  (Read 1465 times)

Offline challenger_73

  • Jr. Member
  • **
  • Posts: 444
Challenger Templates
« on: March 17, 2010 - 01:51:56 PM »
HI,
I have a 73 challenger, and am looking for someone who may have access to or be willing to share the fender scoop template, the cutouts for a 1970 rearspoiler (trunk cutouts) & I need the correct placement of the 340 Fourbarrel emblems. I am currenty building a ralleye clone and need to find the template to do this project correctly. Any help would be grealty appreciated. I am installing a go-wing.
Thanks, your help is always appreciated.

challenger_73
« Last Edit: March 17, 2010 - 01:54:56 PM by challenger_73 »




Offline TreeFrog

  • Resident
  • *****
  • Posts: 2848
  • Can Ya HEMI Now! If you can't dodge it Ram it!
    • TreeFrog
Re: Challenger Templates
« Reply #1 on: March 18, 2010 - 11:07:55 AM »
I will have to make a set soon for a friend in GA.
If you don't have them before I get to it, I will make you a set.
65 Satellite     361 Ruby Red Poly
72 Challenger    360 Top Banana     
73 Challenger    340 Triple Black
87 Dodge Ram     318 Blue
88 Dodge Ram     360 Grey (+)
04 Jeep Grand Cherokee Limited 4.7L Pewter Met.

Offline challenger_73

  • Jr. Member
  • **
  • Posts: 444
Re: Challenger Templates
« Reply #2 on: March 18, 2010 - 11:44:41 AM »
I would really appreciate it. I'm sending my car in soon to have the bodywork done and these holes need to be predrilled before it is painted. That would help me a lot. Thanks Just send me a PM.

Offline TreeFrog

  • Resident
  • *****
  • Posts: 2848
  • Can Ya HEMI Now! If you can't dodge it Ram it!
    • TreeFrog
Re: Challenger Templates
« Reply #3 on: March 18, 2010 - 01:09:03 PM »
your profile does not say where you are located... Where are you?
65 Satellite     361 Ruby Red Poly
72 Challenger    360 Top Banana     
73 Challenger    340 Triple Black
87 Dodge Ram     318 Blue
88 Dodge Ram     360 Grey (+)
04 Jeep Grand Cherokee Limited 4.7L Pewter Met.

Offline challenger_73

  • Jr. Member
  • **
  • Posts: 444
Re: Challenger Templates
« Reply #4 on: March 18, 2010 - 08:04:12 PM »
Port Saint John, Florida

32926

Offline nick68

  • Jr. Member
  • **
  • Posts: 135
Re: Challenger Templates
« Reply #5 on: March 24, 2010 - 02:18:05 PM »
Not a template. but could help
"Did I mention I hate sanding ? "

Offline 1970RTSE

  • Jr. Member
  • **
  • Posts: 184
Re: Challenger Templates
« Reply #6 on: March 26, 2010 - 12:46:17 PM »
I keep tripping over my 72 Rallye fenders while doing some framing in the garage.  I will see if I can make a paper template for you next time I move them if that is OK.