Author Topic: were do I find bullet conectors  (Read 1169 times)

Offline brads70

  • C-C.com Expert
  • ********
  • Posts: 18747
were do I find bullet conectors
« on: April 13, 2010 - 07:57:36 AM »
I'm wiring up some aftermarket gauges and want to plug into the stock  3 socket plug for the lights. I bought generic bullit connectors but they do not fit,too loose.
Were do I get 1 connector?
Thanks Brad
Brad
1970 Challenger 451stroker/4L60 auto OD
Barrie,Ontario,Canada
Proud to own one of the best cars ever made!!!!!

My restoration thread 
http://www.cuda-challenger.com/cc/index.php?topic=59072.0
 My handling upgrade post
http://www.cuda-challenger.com/cc/index.php?topic=73985.0




Offline Supercuda

  • Full Member
  • ***
  • Posts: 534
Re: were do I find bullet conectors
« Reply #1 on: April 13, 2010 - 08:27:33 AM »
If you can't find a bullet that fits, try spreading out the one you have. I have opened up bullets at the break before, with pretty good results. It requires a steady hand, but can be done. Patience is a virtue.

Offline Bullitt-

  • Permanent Resident
  • *******
  • Posts: 12167
  • Better Things To Come Member Since 2/16/06
Re: were do I find bullet conectors
« Reply #2 on: April 13, 2010 - 08:34:40 AM »
.157 ?   At radio shack....Lotta trouble for one connector there are  a couple of spade connectors that work, cigar lighter lamp is one.  Or melt some solder on the one that's small.
Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
Screwed by Photobucket!

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: were do I find bullet conectors
« Reply #3 on: April 13, 2010 - 11:30:06 AM »
I have cut them out of cars at the wrecking yards in the past

Challenger - You`ll wish You Hadn`t

Offline brads70

  • C-C.com Expert
  • ********
  • Posts: 18747
Re: were do I find bullet conectors
« Reply #4 on: April 13, 2010 - 05:02:09 PM »
I have cut them out of cars at the wrecking yards in the past

Good idea!, I have to make a trip there for some parts for my work van. Up to what years had these conectors?
Brad
1970 Challenger 451stroker/4L60 auto OD
Barrie,Ontario,Canada
Proud to own one of the best cars ever made!!!!!

My restoration thread 
http://www.cuda-challenger.com/cc/index.php?topic=59072.0
 My handling upgrade post
http://www.cuda-challenger.com/cc/index.php?topic=73985.0

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: were do I find bullet conectors
« Reply #5 on: April 14, 2010 - 04:19:15 AM »
not sure , probably into the late 70s anyway

Challenger - You`ll wish You Hadn`t

Offline brads70

  • C-C.com Expert
  • ********
  • Posts: 18747
Re: were do I find bullet conectors
« Reply #6 on: April 14, 2010 - 08:46:22 AM »
Thanks! good idea's all! :2thumbs:
Brad
1970 Challenger 451stroker/4L60 auto OD
Barrie,Ontario,Canada
Proud to own one of the best cars ever made!!!!!

My restoration thread 
http://www.cuda-challenger.com/cc/index.php?topic=59072.0
 My handling upgrade post
http://www.cuda-challenger.com/cc/index.php?topic=73985.0

Offline 422STROKER

  • Sr. Resident
  • ******
  • Posts: 5386
  • Member Since 6/3/06
Re: were do I find bullet conectors
« Reply #7 on: April 14, 2010 - 06:55:32 PM »
I'm with Supercuda, take a scratch awl and open them up a bit, just be careful on the sharp end...

Tom
Tom
12.77 @ 108.87 15" Street Drag radial tires 3.23 gear