New reproduction headlight bezels (LH &RH) for 1970 Plymouth Barracuda, Cuda & AAR. They are painted in the correct Med Argent Paint. Not include is the stainless trim. Tooling cost on the stainless trim was not practical for the low production of the 1970 model. This is a licensed reproduction with all of the correct Chrysler Part Numbers. This reproduction is made from a cast able urethane resin, heat resistant to 350 deg. These are very durable, you can drop on the floor and the will not break or crack. These were done in limited numbers only due to the cost and lobar involved. Only 15 set left. Act fast or be let out, No plans to rerun the part. For AAR Cuda you can request a primer set. Sorry no textured Black at this time. This is an Exclusive part from E-body Parts & Restoration.
