Author Topic: driprail clips  (Read 1033 times)

Offline 30below

  • Jr. Member
  • **
  • Posts: 273
driprail clips
« on: May 22, 2010 - 09:10:12 AM »
What the heck are those little black rubber dipped clips for that attach where the moulding curves at the front? .Do they fit between the rubber and the moulding?Lastly what to redip them in?




Offline E-Body Products

  • E-Body Products
  • Sr. Member
  • ****
  • Posts: 1016
  • American Jobs Are Our Children's Future!
    • E-BODY PRODUCTS
Re: driprail clips
« Reply #1 on: May 22, 2010 - 12:09:19 PM »
Any pictures????

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: driprail clips
« Reply #2 on: May 22, 2010 - 01:35:36 PM »
very few cars seem to have them , is yours a 74 ?
the clip is between the drip rail & the window seal channel I think

Challenger - You`ll wish You Hadn`t

Offline 30below

  • Jr. Member
  • **
  • Posts: 273
Re: driprail clips
« Reply #3 on: May 23, 2010 - 08:46:53 AM »
Sorry,no pictures.Its a 73,and i think you are right on the placement Chryco.I can see the marks on the channel where it was attached.Still cant figure out what they are for.

Offline Bullitt-

  • Permanent Resident
  • *******
  • Posts: 12167
  • Better Things To Come Member Since 2/16/06
Re: driprail clips
« Reply #4 on: May 23, 2010 - 03:06:26 PM »
Mine goes trim-clip-rubber...i guess it's to position the glass to fit against the rubber properly.
  I'd use Plasti-Dip to coat anything of that nature.
Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
Screwed by Photobucket!

Offline Travis72

  • Full Member
  • ***
  • Posts: 894
Re: driprail clips
« Reply #5 on: May 24, 2010 - 01:15:22 AM »
My 72 has 1 clip on each side as well.  I was going to try it with and without them

Travis
72 Cuda

Offline 30below

  • Jr. Member
  • **
  • Posts: 273
Re: driprail clips
« Reply #6 on: May 24, 2010 - 09:03:13 AM »
That makes sense on the window positioning and a good tip on the Plasti Dip.