Misc door hardware needed, HELP!!!

[RUSTY Cuda]

K, gettin a little frustrated, thought I had all this stuff ready now I can't find the pieces, I'll start a list & update as I find(or not find ) more!
1st is the remote mirror hardware that fastens it to the door panel
2nd is I need 4 more lower door panel clips, 2 darn cars & 4 clips between them!
Now a question, the upper wiskers that "clip" onto the top of the panel repros will not snap on, got em on & as soon as I roll the woindow it pops off, trying an experiment on the pass side, I put a bead of silicone sealent?cement in there, don't know if it will hold any of yopu guys had this problem. My rears are almost the same, really don't bite on tight but do seem to stay on when rolling up & down the windows!  Rich.

[RUSTY Cuda]

Found the door panel clips, now i'll have enough for both cars!
Still searching for the mirror control fasteners.,any links guys? Rich.

[the_engineers]

This?
http://moparplus.com/product_info.php?products_id=331

or one of these?
http://rtspecialties.net/search.asp?pg=1&stext=mirror&sprice=&stype=&scat=

[RUSTY Cuda]

K, not clear on this, thats the part I need,they list it as 1970, on another site they list 70 seperate & 71/74 as another part, i'd like to get that on with the backing plate but no sure if the thread size will be the same.=r/t doesn't even mention a year.
anyone know for sure if they are different threads or just a cosmetic difference? Thanks Rich.
On page 13 they list the benzel for a 71-74 charger/road runner would that be the one I need?

[RUSTY Cuda]

Shearched thru a bunch of bezels on ebay &  most don't say 70 is different so I'm gonna take a shot & order the 70 piece with the backing ring.
Thanks for the help1 Rich.

[burdar]

BE&A also sells the trim ring for the mirror adjuster.  I'm not sure if they list a separate one for 1970 though.  If there was a separate part just for 1970, Mike would have made it.  Check their website to be sure.

I've heard about the window fuzzies popping off of the door panel before.  I'm not sure what the fix was.  Maybe it had something to do with the brand of the part.  I do know that the new Cuda and Challenger door panels that are supposed to be available soon, come with that seal already installed.

[Bullitt-]

I noticed that the OE window felts had a little tool mark at each end like something had struck or pinched them to squeeze the metal tighter on the plastic.

[RUSTY Cuda]

K, looked at my old fuzzies & there's metal on both sides of the slot, the new ones are rubber on the back, I tried some silicone adhesive, so far t stayed on.
The other stuff is ordered so hopefully interior will get done in the nxt week or two, My rear speaker came today so i can finish up the back at least! Thanks ,Rich.