Author Topic: What type of fastener... (Read 1296 times)

FY1Challenger · « **on:** September 13, 2004 - 10:40:32 AM »

Looking for guidance as to the correct type fastener used on the DODGE hood letters on a 70 Challenger R/T. CC parts book lists two differing part numbers depending on whether it's an early or late book. Is it a plastic push on retainer or a speed nut?�

Thanks!

MEK-Dangerfield · « **Reply #1 on:** September 13, 2004 - 06:17:14 PM »

I could be wrong, but I thought all the lettering and Challenger badges had a plastic sleeve retainer.

Mike

GoMango · « **Reply #2 on:** October 07, 2004 - 06:21:33 AM »

My 70 has speed nuts holding the hood letters on.

70Cuda · « **Reply #3 on:** October 17, 2004 - 04:38:34 PM »

Being a stickler for this kind of stuff myself, I was glad to see there's a new book out featured in Mopar Collector's Guide that should answer about all of the fastener questions you can think of.

http://www.moparrmotorconsulting.com/

I believe he's coming out with a revision to cover even more stuff around March after he gets his B-body book out.

GoMango · « **Reply #4 on:** October 21, 2004 - 09:25:04 PM »

Hadn't had a chance to look at the site yet...Wow, there's some good info on there!

Thanks for posting the link

Author Topic: What type of fastener... (Read 1296 times)

FY1Challenger

What type of fastener...

MEK-Dangerfield

Re: What type of fastener...

GoMango

Re: What type of fastener...

70Cuda

Re: What type of fastener...

GoMango

Re: What type of fastener...