Author Topic: Re: emblem placement on '70 Challenger R/T (Read 791 times)

cudasam · « **on:** June 10, 2010 - 12:53:40 AM »

I have a 73 with a new hood ( no holes yet ) and I want to mount a set of NOS 340 four barrel emblems in the original locations on the side of the scoops. I have the dimensions for the hole locations, but I don't know what size the stock holes are . Also, the new emblems have a plastic sleeve on the mounting pins. Are these what hold them on, or is there speednuts on them ? Thanks, Mike Hi Chryco, the car is getting better all the time.

Chryco Psycho · « **Reply #1 on:** June 10, 2010 - 10:10:55 AM »

Glad youare enjoying it Mike

Bullitt- · « **Reply #2 on:** June 10, 2010 - 11:04:13 AM »

Plastic sleeves are not originally what were used..Barrel Nuts were they push in the hole then the emblem pin spreads them out creating friction to hold. I found some at my local Ace Hardware

HemiOrange70 · « **Reply #3 on:** June 10, 2010 - 11:12:11 AM »

Match a drill bit with the emblem pin

cudasam · « **Reply #4 on:** June 10, 2010 - 11:33:38 PM »

Thanks for the info. I'll get some barrel nuts. I guess the hole has to be bigger to accommodate them !