Author Topic: WANTED 9-10" SB 727 converter (Read 1141 times)

71fish · « **on:** October 19, 2004 - 01:59:36 PM »

Hi - I'm looking for a 9-10" converter for my 340 w/ a forged crank. It's for a 727. Stall needs to be between 2k and 3800.
No 11" verters pls. Will send out payment ASAP for right deal. TIA

71fish

DodgeFreak · « **Reply #1 on:** October 19, 2004 - 06:42:42 PM »

what the difference between 9-10-11 in convert.

other than weight issuses??

neifvneiurv · « **Reply #2 on:** October 21, 2004 - 10:53:38 AM »

I am assuming, since you are asking on this board, that a new converter may be over the budget? Nontheless, just an FYI, here are some links to sources for new converters:

www.hughesperformance.com
www.tciauto.com
www.coanracing.com

Kevin

71fish · « **Reply #3 on:** October 21, 2004 - 12:08:03 PM »

Big difference between 9,10 & 11" converters. Smaller diameter.. the higher the flash stall. 11" converters are only slightly over stock & for stock engines. 0' will jump at full throttle & 9" etc.. all out race.

That is correct.. looking for a used 10" 3000-3800 becasue of my budget. New baby always comes first.

71fish