rear sway bar bushings

[30below]

Well,after 4 years,i finally have the Cuda on the road.Everything seems to work,except a terrible squelch sound from the rear.Think i have it figuered to the rear sway bar bushings.I put new poly ones in,and wonder if i should of used some lithium grease or something?Also does the car have to be on jackstands to remove and grease?

[Chryco Psycho]

Energy Suspension a Slicone lube about the consistancy of Honey , it will not wash away with water & si what I would use in there , if you are under the car I would use jack stands , but removeing the sway bar will not cause the car or suspension to drop down

[30below]

So on stands and let the suspension hang.Any need to remove or loosen the endlinks?

[30below]

Got it done ,thanks