Author Topic: Where to find brake part...  (Read 738 times)

Offline cudadave72

  • Sr. Member
  • ****
  • Posts: 1857
  • you motorboatin sob!!!
Where to find brake part...
« on: September 06, 2010 - 12:19:16 PM »
I have found that I have a leak that is coming from the junction block on the rear axle. Who sells the block?
1972 BS23 H code Cuda, B5 blue, 340 streched to 416 cu in, 727 w/ 8 3/4 rear, 7.23 in the 1/8 mile and 11.38@117mph in the 1/4 on drag radials   Under restoration! Coming soon... 440cuin R3 Indy SMALL BLOCK monster!!!!





Offline GoodysGotaCuda

  • Sr. Resident
  • ******
  • Posts: 5392
Re: Where to find brake part...
« Reply #1 on: September 06, 2010 - 12:21:50 PM »
I believe it comes with the whole rear rubber line. Or is it at the flared hard lines that are screwed into the block? Are they tight?
Build Page: Goody's 'Cuda Build Page
1976 Dodge Warlock
1972 Barracuda - 5.7 Hemi + T56 Magnum

Wheel & Tire Specs:Link

Offline GoodysGotaCuda

  • Sr. Resident
  • ******
  • Posts: 5392
Re: Where to find brake part...
« Reply #2 on: September 06, 2010 - 12:23:58 PM »


Once you find your brand/part numbers be sure to check amazon's prices. Not uncommon the prices are cheaper, and some have free shipping/no tax!
Build Page: Goody's 'Cuda Build Page
1976 Dodge Warlock
1972 Barracuda - 5.7 Hemi + T56 Magnum

Wheel & Tire Specs:Link

Offline mopar12372

  • Sr. Member
  • ****
  • Posts: 1163
    • mopartech
Re: Where to find brake part...
« Reply #3 on: September 06, 2010 - 12:27:05 PM »
autoparts store , some are one peace attached to the brake hose and some are not. goto autozone.com / cskauto.com / napaonline.com
if they dont sell it over the counter they do sell the part on line .  the 1970-74 maybe even later cars  (duster, valiant). most of the brake parts for 1070s -74 challenger/barracuda parts are still available because they used them on early 80s vans and trucks you just have to know wich cars to choose from .
MOPARTECH.NET ( come over and visit some time )
RESTO PICTURES
http://www.cuda-challenger.com/cc/index.php?topic=71096.30

Offline cudadave72

  • Sr. Member
  • ****
  • Posts: 1857
  • you motorboatin sob!!!
Re: Where to find brake part...
« Reply #4 on: September 06, 2010 - 02:17:34 PM »
Thanks guys for the replys! The picture Goody has looks exactly like the part I'm after! I'll check the local parts house. I didnt think they would still be avalible over the counter! :2thumbs:
1972 BS23 H code Cuda, B5 blue, 340 streched to 416 cu in, 727 w/ 8 3/4 rear, 7.23 in the 1/8 mile and 11.38@117mph in the 1/4 on drag radials   Under restoration! Coming soon... 440cuin R3 Indy SMALL BLOCK monster!!!!