dads out of work and been that way for a good while now so looking like time to thin the herd.
74 barracuda street 440 727 mild stall and i think 3.55 gears decent paint fairly nice interior good driver scooped hood 70 still go wing new rlleye wheels 15 by 7's on the fron 15 by 8's on the back new tires 275 60 on the back can't remember the front.
65 dodge d100 shaved door handles needs a repaint aftermarket gauge set in the stock dash floor shift auto. 493 stroker ported eagle crank and rods and diamond piston's 906 heads oversize valves comp solid .585 cam roller rockers. headers stall and reverse manual valvebody. 4.10 gears on a spool 35 spline axles rearend housing setup for ladder bars. new tires old a nice set of old aluminum wheels almost like a minilite wheel.
74 duster 318 bored .030 ported 302 heads with 360 valves and a mopar solid .528 cam performer rpm intake holley carb. 4 speed trans needs a clutch can't remember the gears 8 3/4 rearend. recovered seats needs a little interior work hemi orange paint has a pistol grip shifter slot mags
70 dodge dart 340 bored .030 ported haeds with 2.02 valves comp hydraulic cam .525 lift m1 intake holley carb 3500 stall reverse valvebody 8 3/4 reaend aftermarket big bolt axles and 73 and up big bolt front disc's black paint 340 dual scoop hood bucket seats recovered front and back seat.
87 dodge d50 with 340 .030 hydraulic cam stall reverse valvebody 904 trans stock rearend with 3.91 gears on slicks truck will run 7.50 in the 1/8 all day long. this was my first drag experience at 15 years old good running truck drive with one finger.
69 440 non hp complete intake to pan not sure if it is standard bore but i would bet it is.
i am sure there is somethings i am forgetting he has another 340 he might sell not sure this sucks but life goes on! whatcha think?
