Author Topic: Wt. & Wheel base?  (Read 3661 times)

Offline Glennster

  • Full Member
  • ***
  • Posts: 879
Wt. & Wheel base?
« on: August 25, 2010 - 08:55:49 PM »
 Does the Challenger and Cuda have the same wheel base?

How much does a small block Challenger w/o AC weight?




Offline Moparal

  • Permanent Resident
  • *******
  • Posts: 13085
Re: Wt. & Wheel base?
« Reply #1 on: August 25, 2010 - 11:57:23 PM »
a challenger is 1 inch longer and weighs more :grinyes:

Offline HP2

  • Resident
  • *****
  • Posts: 4478
Re: Wt. & Wheel base?
« Reply #2 on: August 26, 2010 - 08:55:07 AM »
I thought the challenger wheel base was 2" longer.  I've heard of weights from 3200 to 3600 depending on year and options.

Offline brads70

  • C-C.com Expert
  • ********
  • Posts: 18747
Re: Wt. & Wheel base?
« Reply #3 on: August 26, 2010 - 08:59:33 AM »
I always understood the E-body Cuda was 108" and the Challenger was 110" for the wheelbase?
Brad
1970 Challenger 451stroker/4L60 auto OD
Barrie,Ontario,Canada
Proud to own one of the best cars ever made!!!!!

My restoration thread 
http://www.cuda-challenger.com/cc/index.php?topic=59072.0
 My handling upgrade post
http://www.cuda-challenger.com/cc/index.php?topic=73985.0

Offline Bullitt-

  • Permanent Resident
  • *******
  • Posts: 12167
  • Better Things To Come Member Since 2/16/06
Re: Wt. & Wheel base?
« Reply #4 on: August 26, 2010 - 09:06:00 AM »
a challenger is 1 inch longer and weighs more :grinyes:
   May weigh a little more but carry a ton more cool  :poopoke:


Here are some numbers from factory literature

Challenger wheelbase   110 inches                  Cuda   108 inches
Challenger overall length  191.3 inches            Cuda  188.4 inches
Challenger front track    59.7 inches               Cuda    59.7 inches
Challenger rear track     60.7 inches               Cuda    60.7 inches
Challenger curb weight(dry)(small blockV-8) 3390lbs   Cuda   3370lbs

2 inches shorter wheelbase, less than 3 inches shorter overall length and 20lbs lighter for the Cuda

Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
Screwed by Photobucket!

Offline Glennster

  • Full Member
  • ***
  • Posts: 879
Re: Wt. & Wheel base?
« Reply #5 on: August 26, 2010 - 11:53:05 AM »
So where is the Coda shorter as far as the body goes? Does it have doors that are 2'' shorter? Did they take it out of the rear seat / rear fender area?

Offline drewcrane

  • Sr. Member
  • ****
  • Posts: 1298
Re: Wt. & Wheel base?
« Reply #6 on: August 26, 2010 - 05:15:27 PM »
Since the  barracudas have a shorter wheel base,

it is behind the door, but in front of the rear wheel house that they shortened the body,


AMC did the same thing with the Javelin shortened to make an AMX in 1968

Offline boydsdodge

  • Full Member
  • ***
  • Posts: 582
  • Top end's unlimited....Aaaauuuuugghhhhh!!!!!!!!!!!
    • Boydsdodge
Re: Wt. & Wheel base?
« Reply #7 on: August 26, 2010 - 06:46:24 PM »
Dusters and Darts too.
Jackson from Toronto.

Offline 422STROKER

  • Sr. Resident
  • ******
  • Posts: 5386
  • Member Since 6/3/06
Re: Wt. & Wheel base?
« Reply #8 on: August 26, 2010 - 08:04:49 PM »
My Challenger weighed 3500 on the scales at New England Dragway.

Tom

I have fiberglass fenders, hood, aluminum radiator/shroud, intake, master cylinder.  Manual brakes and Power steering.
Tom
12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

Offline dodj

  • Sr. Resident
  • ******
  • Posts: 6197
Re: Wt. & Wheel base?
« Reply #9 on: August 26, 2010 - 09:11:42 PM »
Scott
1973 Challenger  440 4 spd 
2007.5 3500 6.7 Cummins Diesel, Anarchy tuned.
Good friends don't let friends do stupid things. ........alone.

Offline Glennster

  • Full Member
  • ***
  • Posts: 879
Re: Wt. & Wheel base?
« Reply #10 on: September 13, 2010 - 10:11:20 PM »
I took her down to the feed store, she came in at 3,450 pounds........................That's a 340 with aluminum heads and intake (no A/C), 727, 8 3/4 rear, no jack or spare tire and about 1/4 tank of gas.