Who makes/sells braided brake hoses for e-bods?

[ChallengerHK]

That's it 

[Bullitt-]

I ordered a set of Russel Hoses listed for a '72, they did not list for '73-4.  The front were fine but I had to get a tee from the earlier models for the rear to connect to. 


http://www.summitracing.com/parts/RUS-694050/


tee at http://www.inlinetube.com/

TEE01
Mopar Tee Block

This tee block is used on Mopar rear hose applications.

Brass
$14.00

[ChallengerHK]

Thanks, Wade.

[brads70]

I'll second Wades advice. I used Russel too!

[ChallengerHK]

Follow on question: what's the difference in the tees? Admittedly it's been a few years since I was eye-to-eye with mine, but I could swear it looks like the one in the pic. The axle is not original to the car, but I'm pretty sure it did come from a 73 (I'm losing track of what parts cam from what parts cars).

[Bullitt-]

On the 73 models the tee was made on the hose, prior years the hose threads in, otherwise the same.

[ChallengerHK]

On the 73 models the tee was made on the hose, prior years the hose threads in, otherwise the same.

Got it. I must have a pre 72 axle then.