Hi all, well this is my 70 Challenger. I bought it as a rolling chassis about 13 yrs ago and went completely through it but haven't changed the paint job yet ( wife likes it). Bought a used Ray Barton 572 and went through it and added a Bullet cam and put on the tunnel ram and 2 1050's. Ray Barton fixed the damaged heads and had Dave at Protrans build a 727 to hold up to the 950 hp. So far the best time is 8.56 a 155 on motor no power adders @ Alaska Raceway Park in 2011. There is video on You Tube, you can put in ( jim brand racing plum crazy ). I dont race the car much anymore but sure is fun when we do get to.
Mopar Mega Block 4.500
Sonny Bryant crank 4.500
572-13 Indy Heads
Bullet solid roller cam .712 and .765 lift
T&D rockers
BME alumn rods
JE pistons comp is 14.5
Barton oil pump
Protrans 727
roller everthing.
Alumn drums
Billet shafts
Griner low band apply brake with clean nuetral
ATI 9'' convertor
Dana 60 with 4.56 gear
Mark Willams driveline, axles, carrier, yokes
Ladder bar car
Torsion bar front end still
Chromemoly roll cage
Precision Performance shifter
MSD 7al3 and coil.
Fuel VP c-14 or Q-16.
BG 400 pump and reg
Hoosier slicks 32 x 14.5-15
Moroso accumalator