Author Topic: 71 cuda  (Read 3400 times)

Offline HEMIHUNTER

  • Jr. Member
  • **
  • Posts: 192
  • R71CUDA
71 cuda
« on: September 05, 2010 - 01:21:46 PM »
Finally back in the game!!  picking up 71 FJ6 vert.  need to know  width from side mirror to mirrpr and bumper to bumper...thanks
1971 Barracuda Convertible  #'s 318/904
1968 Barracuda Fastback   Built 360/ R727
1965 Coronet 440  #'s 383/4bbl  4sp  Dealer installed dual  carbs
2008 SRT8 Challenger




Offline JayBee

  • Resident
  • *****
  • Posts: 2477
Re: 71 cuda
« Reply #1 on: September 06, 2010 - 09:40:14 AM »
Just measured my '70, I'm guessing it would be the same.

Mirror to mirror: 6' 4" (76 inches). How I did it: taped one end of the tape measure to the left mirror's tip, went through the interior to the other mirror's tip, then added 1/2 inch each side for the slight inwardness of the tips.

Bumper to bumper: 15' 6 1/2" (186.5 inches). How I did it: used a level at the center of each bumper and marked the garage floor, then ran the tape measure under the car to each mark.

P.S. Welcome back and good luck with your new car.
John

1970 Barracuda convertible
2014 Toyota Avalon

Offline HEMIHUNTER

  • Jr. Member
  • **
  • Posts: 192
  • R71CUDA
Re: 71 cuda
« Reply #2 on: September 08, 2010 - 06:51:51 AM »
Thanks, I'm back cause this is a great bunch of people!
1971 Barracuda Convertible  #'s 318/904
1968 Barracuda Fastback   Built 360/ R727
1965 Coronet 440  #'s 383/4bbl  4sp  Dealer installed dual  carbs
2008 SRT8 Challenger

Offline the_engineers

  • Resident
  • *****
  • Posts: 2639
  • Cheap, fast, reliable...pick 2
Re: 71 cuda
« Reply #3 on: November 10, 2010 - 02:52:34 AM »
 :useless:
Brooks

1971 'Cuda 360
2004 Infiniti G35 6-spd Coupe
2001 Toyota Solara Convertible
2002 GMC Savana 1500 Explorer Hightop Conversion
1972 Dodge Dart Swinger...keeping the Slant.  Rocking the turbos.