Author Topic: Transfer case question  (Read 584 times)

Offline 6packCuda

  • Sr. Member
  • ****
  • Posts: 1932
  • Eagle, NE... Member since 11/17/06
Transfer case question
« on: December 09, 2010 - 11:25:07 PM »
Does anybody know if there is any difference between t-cases used with 4 speeds and ones used with automatics in late '70s Dodge pickups? Could you take a t-case from a 4 speed pickup and bolt it up to an automatic?
Dave




Offline Mentally Challenged

  • Sr. Member
  • ****
  • Posts: 1044
Re: Transfer case question
« Reply #1 on: December 10, 2010 - 02:35:29 AM »
I am thinking you can, if I remember correctly. May want to ask over at www.ramchargercentral.com or even the Moparts truck section.
Chris, Ohio

Offline Supercuda

  • Full Member
  • ***
  • Posts: 534
Re: Transfer case question
« Reply #2 on: December 10, 2010 - 08:40:18 AM »
Absolutely, 100% interchangeable. The bolt pattern and input splines are the same; only difference is the front side of the adapter that goes between the trans and t-case. All New Process transfer cases will bolt up.

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Transfer case question
« Reply #3 on: December 10, 2010 - 01:01:19 PM »
 :iagree:

Challenger - You`ll wish You Hadn`t

Offline 6packCuda

  • Sr. Member
  • ****
  • Posts: 1932
  • Eagle, NE... Member since 11/17/06
Re: Transfer case question
« Reply #4 on: December 10, 2010 - 02:17:10 PM »
Thanks guys.
Dave