Vent cable retaining clip

[lime73]

Does anyone know where i can get the retaining clip for vent cable on 73 Cuda drivers side.  Attached is picture of cable mount missing the clip.  Need ASAP.   Thanks

[Bullitt-]

I think this is the beastie http://www.rtspecialties.net/proddetail.asp?prod=6015143

['Cuda Hunter]

That's the one.  I just removed a few of those today.

[lime73]

I think that's a different clip than the one i need.   That clip is the same as the one on the passenger side vent.   The one i need doesnt have the tab to go in a second hole it probably would only have the screw hole.

[Bullitt-]

Sorry about that...I just looked at mine & it's a very generic looking thick metal with a bow for the cable & a screw hole..

[lime73]

Does anyone have one they could take a picture of and post so i could try and fab one since i cant find one?

[72rtchallenger]

Does anyone have one they could take a picture of and post so i could try and fab one since i cant find one?

 i dont have a picture yet ,,it should be easy to make its just a flat square piece of metal with a hole thru the center,,of course it has the curved end to secure the cable,,its not a flimsy clip either its thick enough u wouldnt just bend it very easy,its a 1/2"wide and 3/4" long including the curved end to hold the cable

found this on ebay ,,it looks just like it except the one ear on it
http://cgi.ebay.com/ebaymotors/57-Chevy-Deluxe-Heater-Control-Cable-Retainer-Clip-Set-/190504096898?pt=Vintage_Car_Truck_Parts_Accessories&hash=item2c5aedd482

this one on ebay shows the clip still attached,,it should give u an idea
http://cgi.ebay.com/ebaymotors/MOPAR-VENT-BOX-1970-74-DODGE-PLYMOUTH-CUDA-CHALLENGER-E-/220752160861?pt=Vintage_Car_Truck_Parts_Accessories&fits=Model%3AChallenger&hash=item3365daa85d

[Bullitt-]

  I took 10-shots this was the clearest I could get 

[lime73]

Found my clip at local lawn mower repair store.   Throttle cable retaining clip.   Apparently Ma Mopar and Briggs & Stratton shop from the same parts bin...