Idler Arm Install Help

Author Topic: Idler Arm Install Help  (Read 1213 times)

Offline 70RT/SE

  • Jr. Member
  • **
  • Posts: 37
  • I'm a llama!
Idler Arm Install Help
« on: November 19, 2004 - 04:47:13 PM »
I am trying to install a new idler arm on my Challenger. Is there a trick getting the washers in? I had to pry the old idler out. 
There doen't seem to be enough space for the idler and the 2 washers.  Thanks for any help.




Offline Mopar73340

  • Sr. Member
  • ****
  • Posts: 1130
Re: Idler Arm Install Help
« Reply #1 on: November 20, 2004 - 06:39:46 PM »
It sounds as though you may have something bent. After removing the nut and bolt, the arm should come out and the new one with washers should slide in its place.  If you need a pic let me know as I have just replaced mine.. :)
73-Challenger 340 727/GearVendors Auto
73-Challenger 408 Pistol-Grip 5-speed

Offline 70RT/SE

  • Jr. Member
  • **
  • Posts: 37
  • I'm a llama!
Re: Idler Arm Install Help
« Reply #2 on: November 20, 2004 - 07:48:30 PM »
Thanks for the offer. i think the person who installed the idler the last time over torqed the bolt and pinched the bracket.

Offline Street_Challenged73

  • Sr. Resident
  • ******
  • Posts: 8826
  • '73 FC-7 Challenger..Member since October 20, 2002
    • My '73 Challenger Restoration Page
Re: Idler Arm Install Help
« Reply #3 on: November 20, 2004 - 08:31:22 PM »
Thanks for the offer. i think the person who installed the idler the last time over torqed the bolt and pinched the bracket.

:iagree:  Nothing a little spreading/prying shouldn't fix. :thumbs:
1973 Dodge Challenger......................The ongoing project. (00/----\00)
1991 Dodge Stealth R/T Twin-Turbo....The sunny day cruiser (RTBoost)
1990 Toyota Celica GT Liftback...........The new daily & winter driver.
All-American Muscle: 'Cudas and Challengers...Still the Elite and always will be.

                                                                                             
                 
Street_Challenged73 from Wisconsin