Author Topic: Mini Starter  (Read 839 times)

Offline polarbear123

  • Jr. Member
  • **
  • Posts: 407
Mini Starter
« on: January 29, 2011 - 09:26:16 AM »
What starter do you guys recommend for a 440 with hooker headers. It is for a street car with just north of 450 HP.

Thanks




Offline mojavered

  • Full Member
  • ***
  • Posts: 853
  • Someday!
Re: Mini Starter
« Reply #1 on: January 29, 2011 - 09:34:54 AM »
I am sure there are others, but 93-95 Dodge trucks.
Jason

Offline Barracudadan

  • Full Member
  • ***
  • Posts: 538
Re: Mini Starter
« Reply #2 on: January 29, 2011 - 09:39:29 AM »
Get the one with the correct connection for your wiring or you will be going through what I am right now! :crying:


Offline Cooter

  • Sr. Member
  • ****
  • Posts: 1207
  • There goes the lone Challenger............
    • christinecarclub.com
Re: Mini Starter
« Reply #3 on: January 29, 2011 - 09:40:45 AM »
Also, on the BB Chryslers, the bigger stud will need to be ground off flush with the nut after you run it all the way down on the stud, as it hits the freeze plug near to the rear of block...
1958 plymouth Belvedere 2dr hd top "Christine" [OO)====V====(OO]
1969 dodge Charger "General Lee"         [___|______I______|___]                        
1968 Dodge Dart 2dr sedan 505" Stroker    (O]=0==========0=[O)                
1970 Challenger R/T Clone "Kowalski Special"   (OO) [___________] (OO)

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Mini Starter
« Reply #4 on: January 30, 2011 - 03:28:29 PM »
most of the mini starers I have used will clear on the big blocks but just barely without grinding the stud down

Challenger - You`ll wish You Hadn`t

Offline 500Stroker

  • Full Member
  • ***
  • Posts: 550
Re: Mini Starter
« Reply #5 on: January 30, 2011 - 04:40:12 PM »

Offline polarbear123

  • Jr. Member
  • **
  • Posts: 407
Re: Mini Starter
« Reply #6 on: January 30, 2011 - 08:00:59 PM »
Thanks

Offline polarbear123

  • Jr. Member
  • **
  • Posts: 407
Re: Mini Starter
« Reply #7 on: February 09, 2011 - 10:42:48 AM »
Do I need he starter shield that they advertise with this mini starter

http://chucker54.stores.yahoo.net/manraclighit