Author Topic: Need some wheel width advice.....  (Read 1204 times)

Offline wally426ci

  • Sr. Resident
  • ******
  • Posts: 5095
    • maryland mopars
Need some wheel width advice.....
« on: February 03, 2011 - 09:16:50 PM »
Im getting steel wheels for my 71 Challenger and can't decide on what to get. I have a place that will do any combo.

Should I run all 15x7's?

Or should I run 15x6 in the front with 15x7 or 15x8 in the rear??

I believe my rear tires are 255/60R15 at the moment and i really like them.

I also need to figure out what 15" size tire to get up front in order to look right and still be skinnier than the rear.....  :burnout:
{OOI====I====IOO}
      '71 Challenger
      [O[]=====[]O]
      '68 D100




Offline Katfish

  • Resident
  • *****
  • Posts: 3733
  • 70 Challenger
Re: Need some wheel width advice.....
« Reply #1 on: February 03, 2011 - 10:29:52 PM »
I'd step up to at least 17" rims, mucher wider selection of tires. 

Offline wally426ci

  • Sr. Resident
  • ******
  • Posts: 5095
    • maryland mopars
Re: Need some wheel width advice.....
« Reply #2 on: February 04, 2011 - 02:53:17 PM »
Oh Katfish.... I try to look slightly stock when i can....  :bigsmile:
{OOI====I====IOO}
      '71 Challenger
      [O[]=====[]O]
      '68 D100

Offline DoNotChallengeHer

  • Resident
  • *****
  • Posts: 3383
  • Drive It Like You Stole It !
Re: Need some wheel width advice.....
« Reply #3 on: February 04, 2011 - 02:58:43 PM »
15 x 8's and 15 x 7's  :2thumbs:

Offline wally426ci

  • Sr. Resident
  • ******
  • Posts: 5095
    • maryland mopars
Re: Need some wheel width advice.....
« Reply #4 on: February 04, 2011 - 03:00:03 PM »
Thanks Jackie!!  :cooldancing:

I am still trying to decide. I have a week until i go get them.
{OOI====I====IOO}
      '71 Challenger
      [O[]=====[]O]
      '68 D100

Offline dutch

  • Sr. Resident
  • ******
  • Posts: 6944
Re: Need some wheel width advice.....
« Reply #5 on: February 04, 2011 - 03:01:00 PM »
I`ve got 15x7 all four .  255 in the rear and 235 up front. The front looks good and the rear looks a bit beafier  :dunno:
I plan on using steelies in the future too, but I like a bit more difference front -rear... I`ll probably use 15x6 and 15x8 with 235 and 275
*** Bart ***

Offline the_engineers

  • Resident
  • *****
  • Posts: 2639
  • Cheap, fast, reliable...pick 2
Re: Need some wheel width advice.....
« Reply #6 on: February 04, 2011 - 07:51:44 PM »
I don't like the way 15x6's push the wheel center out.  I think you could get the meaty look all around and the bigs/littles look if you could get the same "front" spacing on all 4 corners.
Brooks

1971 'Cuda 360
2004 Infiniti G35 6-spd Coupe
2001 Toyota Solara Convertible
2002 GMC Savana 1500 Explorer Hightop Conversion
1972 Dodge Dart Swinger...keeping the Slant.  Rocking the turbos.

Offline cudazappa

  • Full Member
  • ***
  • Posts: 709
Re: Need some wheel width advice.....
« Reply #7 on: February 04, 2011 - 09:41:50 PM »


15x7 fronts stock backspace, 15x8 rears 4.5" backspace.  235/60s and 255/60s  just about perfect!

If I was to go that way again, I'd go steelies with dog dishes... (have the dishes, just not the wheels!)  but looking in my wallet 15x7s off an M-body (super cheap over hear still) would look great, too.
1971 Challenger - AutoX project
2015 Dart GT - Daily Driver

Offline wally426ci

  • Sr. Resident
  • ******
  • Posts: 5095
    • maryland mopars
Re: Need some wheel width advice.....
« Reply #8 on: February 04, 2011 - 10:01:55 PM »
That looks good man!

I believe i will run 7 in the front and decide on 8 in rear most likely....  :chatting:
{OOI====I====IOO}
      '71 Challenger
      [O[]=====[]O]
      '68 D100

Offline nqkjw

  • Full Member
  • ***
  • Posts: 512
Re: Need some wheel width advice.....
« Reply #9 on: February 05, 2011 - 08:15:36 AM »
255/60s are a great fit on an 8" rim.
Burnouts are cool but Traction is the Action