trunk light wire routing?

[dodj]

   My Bad, I loaded the wrong photo. 

Thanks a bunch for the first pic. Never did know how that NSS wire harness was supposed to run. I do now! 

[burdar]

OK...here are some pictures of how I have it routed.  If there is something wrong let me know.  With the trunk open, the brown trunk light wire is pretty tight.  I found a picture online of the dome light harness and have it routed according to that picture.  If I took it out of the clip on the wheelwell, that would put less pressure on the brown wire.

[Canadian Cuda]

as you can see by the overspray . none of my wiring has been moved from the factory. i seem to have more slack than you.

[burdar]

Thanks for those pictures.  I wonder if I have the dome light wire routed wrong.   Maybe it isn't supposed to go through that clip on the wheel well.  Thanks again for that pic.  It looks like I shouldn't have run the tail light harness through the hole in that brace.  I'll reroute that harness...that might give me some more slack.