News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: 440 waterhousing question  (Read 483 times)

    Offline dana60

    • Jr. Member
    • **
    • Posts: 119
    440 waterhousing question
    « on: May 26, 2011 - 06:47:59 PM »
    I have a water housing that I am putting on my 440 big block and I am not sure which hole this is for ( see picture # 1 ) Also, on picture # 2, where can I get the fitting that the hose goes on? Thanks everyone for the help!
    Logged


    Offline brads70

    • C-C.com Expert
    • ********
    • Posts: 18747
    Re: 440 waterhousing question
    « Reply #1 on: May 26, 2011 - 06:50:09 PM »
    I used that one for a temperature gauge, not sure if it's "correct" though?
    Logged
    Brad
    1970 Challenger 451stroker/4L60 auto OD
    Barrie,Ontario,Canada
    Proud to own one of the best cars ever made!!!!!

    My restoration thread 
    http://www.cuda-challenger.com/cc/index.php?topic=59072.0
     My handling upgrade post
    http://www.cuda-challenger.com/cc/index.php?topic=73985.0

    Offline 71F7BH23

    • Jr. Member
    • **
    • Posts: 43
    Re: 440 waterhousing question
    « Reply #2 on: May 26, 2011 - 10:25:54 PM »
    the larger upper hole if your not using an external temp gauge , just plug that,  the lower one is the 1/2 nipple heater hose.

    http://www.rosevillemoparts.com/product_info.php/p/70-78-b-rb-hemi-1-2-5-8-nipples/products_id/1702

    Logged

    Offline dana60

    • Jr. Member
    • **
    • Posts: 119
    Re: 440 waterhousing question
    « Reply #3 on: May 27, 2011 - 04:08:48 PM »
    Thanks for the help!!!   :wavingflag:
    Logged
    Pages: [1]
    « previous next »