News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Spacing Parking Brake for Driver Side Kickpanel Speaker Install  (Read 1706 times)

    Offline jforest1

    • Jr. Member
    • **
    • Posts: 297
    Spacing Parking Brake for Driver Side Kickpanel Speaker Install
    « on: August 02, 2011 - 11:38:55 AM »
    Anybody done it?  How?

    JF
    Logged
    '73 Cuda 340 Slapstick, A727 Torqueflite Transmission, Edelbrock Thunder Series AVS 1806, Vintage Air Gen IV A/C system


    Offline gkring

    • Full Member
    • ***
    • Posts: 825
    Re: Spacing Parking Brake for Driver Side Kickpanel Speaker Install
    « Reply #1 on: August 02, 2011 - 10:43:48 PM »
    Little tweaking and a nut for a spacer and it was no problem. This picture makes it look further than it really is.
    Logged
    Greg
    1970 Challenger convertible-in process
    1970 Barracuda driver

    Offline Bullitt-

    • Permanent Resident
    • *******
    • Posts: 12167
    • Better Things To Come Member Since 2/16/06
    Re: Spacing Parking Brake for Driver Side Kickpanel Speaker Install
    « Reply #2 on: August 02, 2011 - 11:32:41 PM »
    I got at least an extra 1/2" just using a longer bolt & a stack of washers, also jacked on the pedal a bit that may have got another 1/4"

    Logged
    Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
    Screwed by Photobucket!

    Offline jforest1

    • Jr. Member
    • **
    • Posts: 297
    Re: Spacing Parking Brake for Driver Side Kickpanel Speaker Install
    « Reply #3 on: August 03, 2011 - 09:40:39 AM »
    Thanks for orienting me guys.  I'll try to start to tool around with it this weekend and let you know how it goes.

    JF
    Logged
    '73 Cuda 340 Slapstick, A727 Torqueflite Transmission, Edelbrock Thunder Series AVS 1806, Vintage Air Gen IV A/C system

    Offline jforest1

    • Jr. Member
    • **
    • Posts: 297
    Re: Spacing Parking Brake for Driver Side Kickpanel Speaker Install
    « Reply #4 on: August 07, 2011 - 12:22:26 AM »
    Well, got in there and started looking around and lo and behold there's only 1.5" depth to work with there!  Add to that the door hinge bracket and the electrical disconnects and I'm going back to my door speaker install plan.

    JF
    Logged
    '73 Cuda 340 Slapstick, A727 Torqueflite Transmission, Edelbrock Thunder Series AVS 1806, Vintage Air Gen IV A/C system
    Pages: [1]
    « previous next »