Author Topic: HID headlight housings  (Read 5449 times)

Offline Bullitt-

  • Permanent Resident
  • *******
  • Posts: 12167
  • Better Things To Come Member Since 2/16/06
Re: HID headlight housings
« Reply #15 on: July 05, 2011 - 08:59:11 PM »
OK so for about $60 more than I could buy the cheapest 4-plastic housings and 4-good halogen bulbs I could get two sets of HELLAs with bulbs & lenses  made from glass I assume.
http://www.myhellalights.com/index.php?cID=123
http://www.amazon.com/gp/product/B001G7A9YS/?ie=UTF8&me=ATVPDKIKX0DER

Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
Screwed by Photobucket!




Offline Strawdawg

  • Resident
  • *****
  • Posts: 2209
    • Vortex Buicks
Re: HID headlight housings
« Reply #16 on: July 05, 2011 - 09:37:28 PM »
Hella and Cibie make some very good lights...the ones ECE rated are not legal in the states altho many have run them...to be strictly legal, they should be DOT approved.  From what I have seen, the ECE lights throw a better pattern (but that is subjective because you can pick good and bad spots from both)
« Last Edit: July 05, 2011 - 10:11:06 PM by Strawdawg »

Offline 500Stroker

  • Full Member
  • ***
  • Posts: 550
Re: HID headlight housings
« Reply #17 on: July 05, 2011 - 10:43:18 PM »
I just put a set of Hella's in my car over the weekend.  Man what a difference.

Offline Bullitt-

  • Permanent Resident
  • *******
  • Posts: 12167
  • Better Things To Come Member Since 2/16/06
Re: HID headlight housings
« Reply #18 on: July 05, 2011 - 10:44:12 PM »
Does anyone see anything wrong with this item? http://cat.hella.com/hella-nafta/jsp/search/advanced/Frameset_ButtonBar_Bottom.jsp?nologin=yes
sells for 27.eaX4= $104+shipping $15   http://mudflaps.com/i-6716717-hella-002850001-135mm-halogen-conversion-headlamp-kit.html

I checked for DOT approval and found this statement
All of the Hella products listed on this website and in our catalogs have SAE/DOT approval for highway use unless otherwise specified.
This means that they are ready to install and use without any further approval or inspections needed.


 http://www.hella.com/produktion/HellaUSA/WebSite/Channels/Drivers/Tested_and_Approved.jsp

I just put a set of Hella's in my car over the weekend.  Man what a difference.


What are the specs/item # ?
« Last Edit: July 06, 2011 - 12:40:41 AM by Bullitt- »
Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
Screwed by Photobucket!

Offline 500Stroker

  • Full Member
  • ***
  • Posts: 550
Re: HID headlight housings
« Reply #19 on: July 05, 2011 - 11:10:32 PM »
I bought these with the H5006A 60/55W Hella Halogen bulbs


http://www.rallylights.com/detail.aspx?ID=733

Offline Strawdawg

  • Resident
  • *****
  • Posts: 2209
    • Vortex Buicks
Re: HID headlight housings
« Reply #20 on: July 06, 2011 - 12:01:18 AM »
Wade, the Hella USA site has DOT approved versions.    The non USA Hella site has the ECD (European) approved lights...Many run them here.  Some claim the E code lights tend to get into the car ahead of you in the right lane when you are in the center lane...

Reading Daniel Stern, he seems to believe that the quality lights like Hella are good in either version and does not have a problem with the E code lights.  Stroker has them, and I have used them in the past and liked them.  They were far better than our lights a few years ago altho our lights are much improved today.   I consider either better than the cheap HID conversions with the sorry reflectors that are not designed for such.

Offline tman

  • Sr. Member
  • ****
  • Posts: 1331
Re: HID headlight housings
« Reply #21 on: July 06, 2011 - 12:20:05 AM »
Has anyone installed the 7" Hellas on their 70 Cuda? Any fitment issues?

Offline ShelbyDogg

  • Sr. Resident
  • ******
  • Posts: 5007
Re: HID headlight housings
« Reply #22 on: July 06, 2011 - 12:21:04 AM »
My housings are some kind of fiber/epoxy resin with a glass front.    BTW, you have to run relays with H4 bulbs or the circuit breaker in the headlamp switch toggles off and on and you lose headlights for a few seconds. It happened in my hardtop with H4s on the outside and regular sealed halogen high beams. Lights went out when I had my high beams on. No more yellow headlights for me.
Rob

3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

My Pace Car restoration thread:
http://www.cuda-challenger.com/cc/index.php?topic=44869.0


Offline 500Stroker

  • Full Member
  • ***
  • Posts: 550
Re: HID headlight housings
« Reply #23 on: July 06, 2011 - 07:56:47 AM »
My housings are some kind of fiber/epoxy resin with a glass front.    BTW, you have to run relays with H4 bulbs or the circuit breaker in the headlamp switch toggles off and on and you lose headlights for a few seconds. It happened in my hardtop with H4s on the outside and regular sealed halogen high beams. Lights went out when I had my high beams on. No more yellow headlights for me.
    That would not be fun to figure out when driving down the road in the dark.  lol  I'm glad I already had my lights on a relay prior to installing the H4's.