News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: 70 E-body Lug Wrench ID #  (Read 1504 times)

    Offline LAA66

    • Sr. Member
    • ****
    • Posts: 1669
    70 E-body Lug Wrench ID #
    « on: July 20, 2011 - 05:50:15 PM »
     Just picked up a lug wrench for my Challenger with numbers F4DC. On the opposite side what maybe a date code of E. Can anyone help me out identifying these codes?

     Thanks, Jon
    Logged


    Offline LAA66

    • Sr. Member
    • ****
    • Posts: 1669
    Re: 70 E-body Lug Wrench ID #
    « Reply #1 on: July 24, 2011 - 05:58:21 PM »
     The reason for asking is the wrench is 3/4" socket end. My aftermarket lugs are 13/16". From this thread it appears 3/4" is correct from the factory?

     http://www.cuda-challenger.com/cc/index.php?topic=45570.msg462723

     
    « Last Edit: July 24, 2011 - 06:08:45 PM by LAA66 »
    Logged

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: 70 E-body Lug Wrench ID #
    « Reply #2 on: July 27, 2011 - 11:38:19 PM »
    3/4 " is the correct size for the factory wheel nuts
    Barry is the Only person I can think of anal enough to log the casting #s of a lug wrench
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline Cuda Cody

    • Resident
    • *****
    • Posts: 3988
    • Vancouver, WA
    Re: 70 E-body Lug Wrench ID #
    « Reply #3 on: July 28, 2011 - 12:14:21 AM »
    I have the info out in my shop.  I'll try to remember to look it up for you tomorrow, but I don't think there's any stamping on the originals. 
    Logged
    The funniest thing about this particular signature is that by the time you realize it doesn't say anything it's to late to stop reading it.

    Offline Topcat

    • C-C.com Expert
    • ********
    • Posts: 15376
    • Member since 9/16/04
    Re: 70 E-body Lug Wrench ID #
    « Reply #4 on: July 28, 2011 - 12:27:34 AM »
    Quote from: Chryco Psycho on July 27, 2011 - 11:38:19 PM
    3/4 " is the correct size for the factory wheel nuts
    Barry is the Only person I can think of anal enough to log the casting #s of a lug wrench

    Scott at Harms would probably know.
    Logged
    Mike, Fremont, CA.

    Pages: [1]
    « previous next »