'78 Dodge D100 Pro Street with ladder bars, 4.56 gears & posi, drive shaft loop. Strong fresh 360 with .484 purple cam, solid motor mounts, choice of 750 annular carb or EZ-efi injection. Custom in bed hidden fuel system with in tank A1000 pump and AN10 lines, switchable bypass regulator from carb to efi, proform electric water pump, line lock, 3" wheel studs, legal battery hold downs and on/off switch, 14v mini alternator, custom valve covers, custom curved distributer, under drive alum pulley set-up. Built A500 OD trans with custom valve body and 3000rpm stall lockup convertor and deep pan from SMR. Many spare parts are available as well. Custom 3" exhaust that works well for bracket racing and street driving, but also have the quieter 2.5" if wanted. This truck is super reliable, and I drove it to work this summer every chance I got. Runs low 8's in the 1/8th, but I have not run it since installing the new custom recurved distributer. It pulls a lot harder now, but weather has not allowed any TNT since installing. Should go high 7's in the 1/8th. Custom paint and interior, fiberglass bumper, custom sheet metal rear bumper, custom headlights, fully street legal. Working wipers. Only thing it needs are a good set of gauges in the dash & better window crank on drivers side.
$12,500 OBO with carb, or $14,500 OBO with efi.
email: dragula426 (at) gmail (dot) com
