News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: install a 5.7 hemi with 545rfe in a E body  (Read 1614 times)

    Offline MEH

    • Jr. Member
    • **
    • Posts: 23
    install a 5.7 hemi with 545rfe in a E body
    « on: October 10, 2011 - 08:47:09 PM »
    I have a 1974 cuda, and want to replace it with 2005 5.7 hemi with a 545rfe tranny. Has anyone been able to do this? If so I want to chat with you about install issues you found with the tranny. Any help would greatly be helpful.
    Logged


    Offline GreenFish

    • Sr. Member
    • ****
    • Posts: 1281
    Re: install a 5.7 hemi with 545rfe in a E body
    « Reply #1 on: October 14, 2011 - 07:35:23 AM »
    I have not, but I dont see any reason why it couldnt be done. The biggest obstacle I see would be the tunnel but that can be cut and re-welded.  Not sure a bout the transmission but it probably requires electronics. There are most likely work around for that as well.
    Logged
    70 cuda, 440, KB pistons, 10.5:1 compression, edlebrock heads,RacerBrown cam, 5-Speed Tremec, Megasquirt EFI

    Offline ntstlgl1970

    • Resident
    • *****
    • Posts: 2204
    • T a c o c a t
    Re: install a 5.7 hemi with 545rfe in a E body
    « Reply #2 on: October 14, 2011 - 11:15:26 AM »
    Quote from: MEH on October 10, 2011 - 08:47:09 PM
    I have a 1974 cuda, and want to replace it with 2005 5.7 hemi with a 545rfe tranny. Has anyone been able to do this? If so I want to chat with you about install issues you found with the tranny. Any help would greatly be helpful.
    Are you doing a complete swap - i.e. stock harness, computer, everything?? If not, and you are going to go aftermarket controls, spend some time making sure there is support for the 545RFE. I have seen aftermarket support for the NAG1 but not the RFE...
    Logged
    70 Cuda, 7.0L Gen-III Hemi, Viper T56 w/9310 gearset, 3.91's, Megasquirt MS3x v3.57, Innovate wideband, Firm Feel upper arms, torsion bars, springs and strut rods, QA1 DA shocks. I did everything on this car except the fancy paint stuff and I drive it...and I can't seem to stop messing with it....
    Pages: [1]
    « previous next »