Author Topic: Headliner question  (Read 870 times)

Offline Scat Pack Fever

  • Mopars Rule!!!!!!!! Always Have, Always Will
  • Full Member
  • ***
  • Posts: 613
  • Chrysler did it best!
Headliner question
« on: November 24, 2011 - 02:20:32 PM »
Hello! I think I'm missing something. Putting the bows in the holes is not working out. Are there supposed to be holding guides the bows are supposed to slide into? Happy Thanksgiving!




Offline 72rtchallenger

  • Sr. Member
  • ****
  • Posts: 1734
  • 72 to 70 clone
    • cardomain
Re: Headliner question
« Reply #1 on: November 24, 2011 - 02:28:22 PM »
no holding guides,,the bows have to be in a certain order and only the rear bow has some hooks that keep it from moving to far,,there is a good thread on here somewhere that helps,if I  can find it I will post a link
72rtchallenger
my challengers restro at http://www.cardomain.com/ride/399010
what happens in the garage
stays in the garage

Offline Scat Pack Fever

  • Mopars Rule!!!!!!!! Always Have, Always Will
  • Full Member
  • ***
  • Posts: 613
  • Chrysler did it best!
Re: Headliner question
« Reply #2 on: November 24, 2011 - 02:32:06 PM »
That's not good news. The bows sag too much and the middle bow isn't quite long enough. I removed the headliner from a challenger and kept the bows in order. Are the bows supposed to touch the roof? Thanks for the fast reply by the way.

Offline 72rtchallenger

  • Sr. Member
  • ****
  • Posts: 1734
  • 72 to 70 clone
    • cardomain
Re: Headliner question
« Reply #3 on: November 24, 2011 - 02:38:43 PM »
this may help,,and they are close to the roof
are you sure about the middle bow being short ?
http://restorick.com/tech/topic.asp?TOPIC_ID=5
72rtchallenger
my challengers restro at http://www.cardomain.com/ride/399010
what happens in the garage
stays in the garage

Offline Scat Pack Fever

  • Mopars Rule!!!!!!!! Always Have, Always Will
  • Full Member
  • ***
  • Posts: 613
  • Chrysler did it best!
Re: Headliner question
« Reply #4 on: November 24, 2011 - 08:14:37 PM »
Cool! Thanks for the thread. I will attempt this again.