Author Topic: Oil pan clearance issues  (Read 1135 times)

Offline mach3107

  • Jr. Member
  • **
  • Posts: 96
Oil pan clearance issues
« on: October 12, 2011 - 09:26:09 PM »
I need some help. I'm installing a 360 into my 73 challenger. The engine came with a deep oil pan with no name on it. When installed, the drag link bar hits the back of the oil pan when the car is turned 1/2 way left or right. I held a friends deep oil pan next to mine and they look very similar. Any input would be great




Offline the_engineers

  • Resident
  • *****
  • Posts: 2639
  • Cheap, fast, reliable...pick 2
Re: Oil pan clearance issues
« Reply #1 on: October 12, 2011 - 11:37:28 PM »
Is the drag link offset towards the pan, or away?
Brooks

1971 'Cuda 360
2004 Infiniti G35 6-spd Coupe
2001 Toyota Solara Convertible
2002 GMC Savana 1500 Explorer Hightop Conversion
1972 Dodge Dart Swinger...keeping the Slant.  Rocking the turbos.

Offline mach3107

  • Jr. Member
  • **
  • Posts: 96
Re: Oil pan clearance issues
« Reply #2 on: October 13, 2011 - 09:05:52 PM »
I'm not sure what you mean by offset but as far as I can tell the steering linkage looks stock

Offline Strawdawg

  • Resident
  • *****
  • Posts: 2209
    • Vortex Buicks
Re: Oil pan clearance issues
« Reply #3 on: October 13, 2011 - 09:48:19 PM »
Search will give you a number of threads on this topic...here is a recent one  http://www.cuda-challenger.com/cc/index.php?topic=79657.msg801438#msg801438

Offline footin70rt

  • Jr. Member
  • **
  • Posts: 286
Re: Oil pan clearance issues
« Reply #4 on: October 14, 2011 - 12:01:05 AM »
What has caught my eye is the gap between the mount and block on the upper rear bolt. Cold this be the wrong mount? I'm used to looking at Big Blocks, but that gap isn't right.   :2cents:
Thomas
Driving the same 70 R/T since October 1985
Native of Bozeman, MT

Offline ntstlgl1970

  • Resident
  • *****
  • Posts: 2204
  • T a c o c a t
Re: Oil pan clearance issues
« Reply #5 on: October 14, 2011 - 11:17:22 AM »
What has caught my eye is the gap between the mount and block on the upper rear bolt. Cold this be the wrong mount? I'm used to looking at Big Blocks, but that gap isn't right.   :2cents:
:iagree:
And also, it looks like the sump is positioned for a different chassis - it should sit more foward towards the K member
70 Cuda, 7.0L Gen-III Hemi, Viper T56 w/9310 gearset, 3.91's, Megasquirt MS3x v3.57, Innovate wideband, Firm Feel upper arms, torsion bars, springs and strut rods, QA1 DA shocks. I did everything on this car except the fancy paint stuff and I drive it...and I can't seem to stop messing with it....

Offline mach3107

  • Jr. Member
  • **
  • Posts: 96
Re: Oil pan clearance issues
« Reply #6 on: October 15, 2011 - 01:29:32 PM »
the gap on the engine mount is a common issue when trying to find the correct mounts for a small block (from what I understand). I'm just going to fill it with a spacer.

I guess what I'm looking for is should I try and cheat the steering linkage or do I have to get a a new pickup and oil pan? If so, any suggestions?